Operating the Drive
Assure application software is installed before using the
Starting Up
1Turn on the computer.
2Press eject button and the tray extends from drive unit.
Note:
Eject button does not function if software disabled.
Insert disc into drive slot with disc label facing up.
Push gently until
Important:
When loading a disc, do not attempt to overpower the
As the drive begins reading the Table of Contents (TOC) data, the busy indicator lights and remains illuminated until read is completed.
When the busy indicator switches off, the drive is ready to receive commands, data may be retrieved from the disc. After loading a disc,
it takes a moment for the drive to become ready while Program Memory Area is read. From this point, follow instructions provided with the application software.
Note:
Busy indicator on drive continues to light amber if disc is not properly inserted or a malfunction occurs.
In such a case, eject the disc (tray) and reinsert it properly. Should the light remain amber, consult your dealer or qualified service point. During audio play the busy indicator remains amber, this is normal.
■Opening the drawer (tray) manually in an emergency
In the event of electrical or mechanical drive failure, a manual emergency eject is provided to allow manual disc removal.
1Turn off the computer and remove power cable.
2Insert a pointed object, perhaps a paper clip, into the emergency eject hole and push (typical force required is 46 N [4.7 kg]).
at least 35 mm
After thus removing disc, consult dealer or qualified service point.
16 | Operating the Drive | Operating the Drive | 17 |