Top view (partial)
1 | 2 | 3 |
| 5 |
| 6 | 7 | 6 | 9 |
| |||
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Side | view |
|
|
|
| I | - | - |
|
|
| |||
| I |
| I | I II | 1 I |
|
|
|
|
|
|
Underside view
4
Key to Callouts
1. +12V - Connected to fuse or circuit breaker, then battery’s positive post.
2.Ground - Main ground connection. Bolt to a clean chassis ground in the vehicle.
3.Remote - Remote
4.LED - Indicates amplifier power on.
5.Speaker Output Connections - Channels 1 & 2
6.Crossover Output - Low level output to auxiliary amplifier for high or low pass.
7.Bass EQ - Adjustable bass equalization circuit, Cl to +9 dB boost at 45 Hz.
6.Input Level - Variable from 100mV to 2.5V.
9.Inputs - Right and left channel inputs; only right channel input used in “Mono” mode.
16.[underside] Main Fuse - Main power supply fuse. Replace only with same fuse value.
11.[underside] Crossover S.1.P.s - Crossover frequency settings for amplifier and crossover line outputs.
12.[underside] Stereo/Bridged Mono Switch - Select “Mono” for bridged operation (use only right channel input) or “Stereo”
13.[underside] Line Out Crossover Switch - Select high pass, low pass, or full range operation of crossover outputs.
14.[underside] Amplifier Crossover Switch - Select high pass, low pass, or full range operation of amplifier.
15.[underside] Bass EQ Switch - On/Off switch for bass equalization circuit.
5