Soundstream Technologies SA.244, SA.120, SA.245 owner manual Key to Cailouts

Ii li io 2; 2i 2i

Underside View

Key to Cailouts

1.+12V - Connected to fuse or circuit breaker, then battery’s positive post.

2.Ground - Main ground connection. Bolt to a clean chassis ground in the vehicle.

3.Remote - Remote turn-on input from the head unit. Accepts +lZV.

4.LED - Indicates amplifier power on.

5.Speaker Output Connections - Channels 1 & 2

6.High Pass Crossover Output - Low level high pass outputs to auxiliary

amplifier. .

7.Bass EQ - Adjustable bass equalization circuit, 0 to +9 dB boost at 45 Hz-Channels 1 & 2.

8.Input Level - Variable from IOOmV to 2.5V-Channels 1 & 2.

9.Inputs - Right and left channel inputs; only right channel input used in “Mono” mode-Channels 1 & 2.

IO. Speaker Output Connections - Channels 3 & 4

11, Low Pass Crossover Output - Low level low pass output to auxiliary amplifier.

12.Bass EQ - Adjustable bass equalization circuit, 0 to +9 dB boost at 45 Hz-Channels 3 8 4 & low pass output.

13.Input Level - Variable from 1OOmV to 2.5V-Channels 3 & 4.

14.Inputs - Right and left channel inputs; only right channel input used in “Mono” mode-Channels 3 & 4.

15.[underside] Main Fuse - Main power supply fuse. Replace only with same fuse value.

16.[underside] Xover S.1.P.s - Crossover frequency settings for amplifier and outputs-channels 1 & 2 8 high pass and low pass outputs.

17.[underside] Xover S.1.P.s - Crossover frequency settings for amplifier and outputs-Channels 3 & 4 & low pass outputs.

18.[underside] Stereo/Bridged Mono Switch - Select “Mono” for bridged operation (use only right channel input) or “Stereo” for 2-channel Stereo or Mixed Mono operation; See crossover section for more details-Channels 1 & 2.

19.[underside] Amplifier Crossover Switch - Select high pass, low pass, or full range operation-Channels 1 & 2.

20.[underside] Bass EQ Switch - On/Off switch for bass equalization circuit-Channels 1 & 2.

21.[underside] Stereo/Bridged Mono Switch - Select “Mono” for bridged operation (use only right channel input) or “Stereo” for2-channel Stereo or Mixed Mono operation; See crossover section for more details.

22.[underside] Amplifier Crossover Switch - Select high pass, low pass, or full range operation-Channels 3 & 4.

23.[underside] Bass EQ Switch - On/Off switch for bass equalization circuit-Channels 3 & 4.

24[underside] Input Select - Selectable inputs from internal (from channels 1 & 2) or external.

6 7