BASE SERVER STANDARD CAPABILITIES and FEATURES
Capability/Feature | Description |
|
|
Storage controller | ■ Embedded RAID (3 Gbs) |
| • Embedded |
| drives (RAID 0, 1, 10) |
| • ROM5 embedded RAID upgrade, supporting up to 8 SAS/SATA drives |
| (RAID 0, 1, 10). SAS and SATA drives can be mixed. |
| • ROM55 embedded RAID upgrade, supporting up to 8 SAS/SATA drives |
| (RAID 0, 1, 10, 5). SAS and SATA drives can be mixed. |
| ■ |
| • Cisco UCSC RAID SAS |
| SAS/SATA drives supporting RAID 0, 1, 10, 5, and 50. SAS and SATA |
| drives can be mixed. This card has a product ID (PID) of |
| |
| • Cisco UCSC RAID SAS |
| eight SAS/SATA drives supporting RAID 0, 1, and 10. SAS and SATA |
| drives can be mixed. This card has a product ID (PID) of |
|
|
| ■ |
| • LSI MegaRAID SAS |
| card (occupies a |
| 10, 5, 6, 50, 60 and up to 8 internal SAS or SATA drives. SAS and SATA |
| drives can be mixed. |
| • LSI MegaRAID SAS |
| card, supporting RAID 0, 1, 10, 5, 6, 50, and 60 and up to eight |
| internal SAS or SATA drives. SAS and SATA drives can be mixed. |
Interfaces | ■ Rear panel |
| • One RJ45 serial port connector |
| • Two USB 2.0 port connectors |
| • One DB15 VGA connector |
| • Two |
| • One |
| Integrated Management Controller (CIMC) firmware |
| ■ Various PCIe card ports (dependent on which cards are installed) |
| • Converged Network Adapter (CNA) ports |
| • Network Interface Card (NIC) ports |
| • Host Bus Adapter (HBA) ports |
| ■ Front panel |
| • One KVM console connector (supplies two USB, one VGA, and one |
| serial connector) |
Front Panel | A front panel controller provides status indications and control buttons |
Power subsystem | Up to two 450 W 650 W power supplies. One is mandatory; one more can be |
| added for 1 + 1 redundancy. |
|
|
Cisco UCS Cisco UCS C220 M3 | 7 |