Cisco Systems UCSEZB230EX256 Installing and Removing a Solid State Drive, Product ID Description

Installing and Removing a Solid State Drive

C o m m e n t s t o u c s - d o c f e e d b a ck @ c i s c o . c o m

Installing and Removing a Solid State Drive

There are up to 2 front-accessible, hot-swappable SSD drives per blade. You can remove or install supported blade server SSD drives (see Table 2 ) without removing the blade server from the chassis. All other component replacements for a blade server require removing the blade from the chassis. Unused SSD drive bays should always be covered with cover plates (N20-BBLKD-7MM) to assure proper cooling and ventilation.

Table 2	Supported SSD Drives (M1 Models)
Product ID		Description
UCS-SSD100GI1F105		100 GB Low Height 7mm SATA SSD hot plug/drive sled mounted1
N20-D032SSD		32 GB Low Height SATA SSD SFF drive/hot plug/drive sled mounted
N20-D064SSD		64 GB Low Height SATA SSD SFF drive/hot plug/drive sled mounted

1. This SSD requires UCS capability catalog version 1.0.46 or later.

Cisco UCS B230 Blade Server Installation and Service Note

10 OL-23811-01