Dell T7610 owner manual Installing the System Fan, Removing the I/O Panel and the USB 3.0 Ports

13.Remove the grommets that secure the system fan , lift up the fan and remove it from the fan assembly.

Installing the System Fan

1.Tighten the grommets that secure the system fan to the system-fan module.

2.Connect the system-fan cable to the system-fan module.

3.Install the screws that secure the system-fan module to the chassis.

4.Connect the system-fan cables to their connectors on the system board.

5.Route the system-fan cables out of the opening in the system-fan module in the direction of the system board.

6.Slide the larger air duct downwards into the retention tabs until it is secured to the system-fan module.

7.Slide the smaller air duct downwards into the retention tabs until it is secured to the system-fan module.

8.Install the screws that secure the optical-drive bracket to the chassis.

9.Install:

a.air tunnel (if available)

b.optical drive

c.left cover

10.Follow the procedures in After Working Inside Your Computer.

Removing the I/O Panel and the USB 3.0 Ports

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.left cover

b.front cover

31