3.To remove the processor:
NOTE: The processor cover is secured by two levers. They have icons that indicate which lever needs to be opened first and which lever closes first.
a.Press down on the first lever holding the processor cover in place and release it sideways from its retention hook.
b.Repeat step 'a' to release the second lever from its retention hook.
c.Lift up and remove the processor cover.
d.Lift the processor to remove it from the socket and place it in antistatic package.
4.Repeat the above steps to remove the second processor (if available) from the computer. To verify if your computer has dual processor slots, see the System Board components.
Installing the Processor
1.Place the processor in its socket.
2.Replace the processor cover.
NOTE: The processor cover is secured by two levers. They have icons that indicate which lever needs to be opened first and which lever closes first.
3.Slide the first lever sideways into the retention hook to secure the processor.
4.Repeat step '3' to slide the second lever into the retention hook.
5.Install:
a.heatsink
b.air tunnel (if available)
c.cover
42