Dell T7610 Option Description, Default Setting All drives are enabled, Smart Reporting, Audio

Page 56

Option

Description

 

 

SATA2–HDD2

SATA2–ODD0

SATA3–HDD1

SATA2–HDD3

SATA2–ODD1

Default Setting: All drives are enabled.

NOTE: If the hard drives are connected to a RAID controller card, the hard drives will display {none} in all the fields. The hard drives can be seen in the RAID controller card BIOS.

• T7610

SATA2–ODD0

 

SATA2–ODD1

 

Default Setting: All drives are enabled.

 

 

NOTE: If the hard drives are connected to a RAID controller card,

 

 

the hard drives will display {none} in all the fields. The hard drives

 

 

can be seen in the RAID controller card BIOS.

SMART Reporting

This field controls if the hard drive errors for the integrated drives are

 

reported during system startup. This technology is part of the SMART

 

(Self Monitoring Analysis and Reporting Technology) specification.

 

Enable SMART Reporting - This option is disabled by default.

USB Configuration

Allows you to enable or disable the internal USB configuration. The

 

options are:

 

Enable Boot Support

 

Front USB Ports

 

• Back Quad USB Ports

 

• Enable internal USB ports

 

USB3 Ports

PCI Bus Configuration

Allows you to configure the PCI buses. The options are:

 

256 PCI Buses (Default)

 

128 PCI Buses

 

64 PCI Buses

Memory Map IO above 4GB

Allows you enable or disable Memory Map IO above 4GB.

 

Memory Map IO above 4GB - This option is disabled by default.

Optional HDD Fans

Allows you to control the HDD fans.

 

Default Setting: depends on the system configuration

Audio

Allows you enable or disable the audio feature.

 

Default Setting: Audio is enabled

SAS RAID Controller (T7610 only)

Allows you to control the operation of the integrated SAS RAID HDD

 

controller.

56

Image 56
Contents Regulatory Model D02X Regulatory Type D02X002 Page Contents System Setup DiagnosticsTroubleshooting Your Computer Additional InformationTechnical Specifications Contacting Dell Page Working on Your Computer Before Working Inside Your ComputerClick Shut Down Turning Off Your ComputerAfter Working Inside Your Computer Page Page Recommended Tools System OverviewRemoving the Power Supply Unit PSU Installing the Power Supply Unit PSUInstalling the Front Cover Removing the Front CoverRemoving the Hard Drive Page Installing the Hard Drive Installing the Left Cover Removing the Left CoverRemoving the PCI Card Removing the Intrusion SwitchInstalling the Intrusion Switch Installing the PCI Card Removing the Slimline Optical DrivePage Page Installing the Slimline Optical Drive Removing the Air TunnelInstalling the Air Tunnel Removing the Memory Installing the MemoryRemoving the Coin-Cell Battery Installing the Coin-Cell Battery Removing the HeatsinkInstalling the Heatsink Removing the Heat-Sink FanInstalling the Heatsink Fan Removing the System FanPage Page Page Installing the System Fan Removing the I/O Panel and the USB 3.0 PortsPage Installing the I/O Panel and the USB 3.0 Ports Removing the Power Switch Follow the procedures in Before Working On Your ComputerInstalling the Power Switch Removing the SpeakerInstalling the Speaker Removing the Right Cover Installing the Right Cover Removing the 5.25-inch Optical DriveInstalling the 5.25-inch Optical Drive Removing the Thermal SensorPage Installing the Thermal Sensor Removing the ProcessorInstalling the Processor Removing the Hard-Drive Fan Installing the Hard-Drive Fan Removing the Power Supply Unit PSU CardInstalling the Power Supply Unit PSU Card Removing the System Board Installing the System Board System Board Components CPU2SLOT2 Page Memory Module Guidelines Front Panel Chassis LockPower Supply Unit PSU Lock Keys Navigation Boot SequenceNavigation Keys System Setup Options Boot SequenceBoot List Option Advanced Boot OptionsOption Description Date/Time Option Description Integrated NICSerial Port Sata OperationDefault Setting All drives are enabled USB ConfigurationPCI Bus Configuration PCI Buses DefaultStrong Password Password BypassDisabled Default Password ChangeOption Description Multi Core Support Admin Setup LockoutOption Description Secure Boot Enable Default Setting Enable Intel SpeedStep Default Setting Enable Intel TurboBoostOption Description AC Recovery Power Off DefaultKeyboard Errors FastbootOption Description Deep Sleep Control Fan Speed ControlUpdating the Bios System and Setup Password ComputerDisabling a System Password Page Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsPage Troubleshooting Your Computer Diagnostic LEDsRe-seat all power and data cables Error Messages Error MessageErrors That Do Not Halt Your Computer Error Message Page Feature Feature SpecificationPCI SLOT1 Inches Sata HDD device Serial Front I/O Feature Specification Codes Cm/sec 20 in/sec Page Contacting Dell
Related manuals
Manual 81 pages 45.18 Kb