Dell™ PowerEdge™ T610 Technical Guidebook
constraints
|
|
| PERC |
| PERC 6/E – there is sufficient thermal margin to allow for a 3,2,5,4,1 order |
Thermal | 10Gb NICs – slot order must be 4,5,1,2,3 |
| |
| SAS 5/E and 5/iR – there is sufficient thermal margin to allow for a |
| 3,2,4,5,1 order |
| Rest of the PCIe cards – recommended slot order is Slot 4,5,1,2,3 |
|
|
| Slot 1 – |
| Slot 2 – |
Mechanical | Slot 3 – |
| Slot 4 – |
| Slot 5 – |
|
|
| Slot 1 – PCIe Gen2 x4 |
| Slot 2 – PCIe Gen2 x8 |
Performance | Slot 3 – PCIe Gen2 x8 |
| Slot 4 – PCIe Gen2 x4 |
| Slot 5 – PCIe Gen2 x4 |
|
|
B. Boot Order
PCIe scan order (from the BIOS HW spec v1.0)
IOH port 1,2 (PCI Express Gen1 x4) – BCM5709C Embedded NIC #1
IOH port 3 (PCI Express Gen1 x4) – Slot 5
IOH port 9 (PCI Express Gen1 x4) – Slot 1
IOH port 7/8 (PCI Express Gen2 x8) – Slot 2
IOH port 5/6 (PCI Express Gen2 x8) – Slot 3
IOH port 4 (PCI Express Gen1 x4) – Slot 4
IOH port 10 (PCI Express Gen1 x4) – PERC6i
Section 12. Storage
A. Overview / Description
The PowerEdge T610 has an
For SATA/SAS mixing, two SAS drives are supported with the 2.5" or 3.5" backplane. In this configuration, one pair of drives will be SAS and the remaining six drives will be SATA.
B. Drives
The PowerEdge T610 supports 2.5" and 3.5" hard drive carriers. These carriers implement new industrial design to match the front bezel. Legacy carriers are not supported on the PowerEdge T610.
38