Dell H710P, H310, H810 manual Checking Data Consistency

Page 62

3Select Start Init. to begin a regular initialization or select Fast Init. to begin a fast initialization.

4A pop-up windows is displayed indicating that the virtual disk has been initialized.

5Repeat the procedures from step 1 to step 4 to configure another virtual disk.

NOTE: The PERC H310 card supports up to 16 virtual disks per controller, and the PERC H710, H710P, and H810 cards support up to 64 virtual disks per controller. The currently configured virtual disks display on the screen.

Checking Data Consistency

Select the Consistency Check (CC) option in the configuration utility to verify the redundancy data in virtual disks that use RAID levels 1, 5, 6, 10, 50, and 60. (RAID 0 does not provide data redundancy.)

If you attempt to run a Consistency Check on a virtual disk that has not been initialized, the following error message is displayed:

The virtual disk has not been initialized. Running a consistency check may result in inconsistent messages in the log. Are you sure you want to continue?

You can select Yes or No. If you select Yes, the CC operation continues. If you select No, the operation ends.

Perform the following steps to run a Consistency Check:

1Press <Ctrl><N> to access the VD Mgmt menu screen.

2Press the down-arrow key to highlight Virtual Disk #.

3Press <F2> to display the menu of available actions.

4Press the down-arrow key to select Consistency Check.

5Press the right-arrow key to display the available actions (Start, Stop).

6Select Start and press <Enter> to run a Consistency Check.

The Consistency Check runs and checks the redundancy data in the virtual disks.

7After you start the Consistency Check, press <Esc> to display the previous menu if needed.

62

Management Applications for PERC Cards

Page 61 Page 63
Image 62
Page 61 Page 63
Contents User’s Guide Model UCPA-801, UCPB-800, UCPM-800 and UCPE-800 Contents Automatic Replace Member Battery Transparent Learn CycleRemoving the Perc Controller Installing the Perc Controller Support For Internal Setting up Redundant Path SupportInstalling the Windows Drivers Reverting to Single Path SupportBios Configuration Utility Virtual Disk ManagementUefi RAID Configuration Utility Troubleshooting Security Key Errors Security Key Implementation Security Key Management109 120 Degraded State of Virtual Disks 118119 124128 Linux Operating System Errors 126125 Contents Overview GB DDR3 Supported Operating Systems Go to support.dell.com Related DocumentationContacting Dell Visit support.dell.comFeatures Physical Disk Power ManagementTypes of Virtual Disk Initialization Configured Spin Down DelaySavings mode Background Initialization of Virtual DisksFull Initialization of Virtual Disks Fast Initialization of Virtual DisksConsistency Checks Disk RoamingVirtual Disk Migration Features Virtual Disk Write Cache Policies Write-Back and Write-ThroughVirtual Disk Read Cache Policies Conditions Under Which Write-Back is EmployedReconfiguration of Virtual Disks RAID Level Migration Fault Tolerance Smart FeaturePatrol Read Automatic Replace Member with Predicted FailureRedundant Path Support For Perc H810 Only Physical Disk Hot Swapping Using Persistent Hot Spare SlotsPhysical Disk Failure Detection Using Replace Member and Revertible Hot Spares Controller Cache PreservationCache Preservation With Non-Volatile Cache NVC Battery Transparent Learn CycleCache Data Recovery TLC Time FrameWhen to Replace the Battery Features Deploying the Perc Card Installing the Perc Controller Removing the Perc ControllerRemoving and Installing the Perc Adapter Removing and Installing the Perc Mini Blade Controller Removing and Installing the Perc Mini Monolithic Controller Support For Internal Multiple ControllersSetting up Redundant Path Support on the Perc H810 Adapter Deploying the Perc Card Redundant Path Support Configuration With Two Enclosures Creating the Driver Media Driver InstallationInstalling the Windows Drivers Click Continue Pre-Installation RequirementsCreating the Device Driver Media Downloading Drivers From the Dell Support WebsiteDriver Installation Select Install from a list or specific location Click Device ManagerUpdating the Linux Driver Driver Installation Upgrading the Kernel Driver Installation Management Applications for Perc Cards Dell OpenManage Storage ManagementBios Configuration Utility Entering the Bios Configuration UtilityMenu Navigation Keys Notation Meaning and Use Example Exiting the Configuration UtilityMenu Navigation Controls To exit the Bios Configuration Utility Setting Up Virtual Disks Mgmt, Ctrl Mgmt, and Foreign View PD MgmtVirtual Disk Parameters and Descriptions RAID LevelWrite Policy Virtual Disk Management Creating Virtual DisksManagement Applications for Perc Cards Management Applications for Perc Cards Initializing Virtual Disks Converting Physical Disk to RAID Capable for Perc H310Converting Physical Disk to Non-RAID for Perc H310 Checking Data Consistency Management Applications for Perc Cards Management Applications for Perc Cards Select Foreign Configuration View to display Break Mirror Break Mirror in Bios Configuration Utility Managing Preserved Cache Select Manage Preserved CacheDeleting a dedicated hot spare Managing Dedicated Hot SparesCreating a dedicated hot spare Deleting Virtual Disks Deleting Disk GroupsSelect Clear Config Bios Configuration Utility Menu OptionsClearing the Configuration Information on the Virtual Disk Management Screen Virtual Disk Management VD MgmtVirtual Disks Physical Disks Information Displayed in Right PanelVirtual Disks Disk Group # Properties Management Applications for Perc Cards Information on the Virtual Disk Management Screen Virtual Disk Actions Virtual Disk Actions DescriptionPhysical Disk Management PD Mgmt Physical Disk Actions Description Physical Disk ActionsRebuild Controller Management Ctrl Mgmt Non-RAID drive Controller Management ActionsController Management Options Description Physical Disk Management Foreign Configuration ViewSetting LED Blinking Creating Global Hot Spares Removing Global or Dedicated Hot SparesReplacing an Online Physical Disk Stopping Background Initialization Restrictions and LimitationsPerforming a Manual Rebuild of an Individual Physical Disk Enabling Boot SupportController Management Enabling Bios Stop on Error Enabling Auto Import Entering the Uefi RAID Configuration Utility Uefi RAID Configuration UtilityRestoring Factory Default Settings Exiting the Uefi RAID Configuration Utility Configuration OptionsController Management Virtual Disk Management Physical Disk ManagementEnclosure Management CacheCade Virtual Disk Characteristics CacheCadeConfiguring and Managing CacheCade Virtual Disks CacheCade Virtual Disk ManagementCreate CacheCade Virtual Disk Select Create CacheCade Virtual Disk and press EnterReconfiguring CacheCade Virtual Disks Delete CacheCade Virtual DiskAutomatic Reconfiguration of CacheCade Virtual Disks Manual Resizing of CacheCade Virtual Disks Security Key Implementation Security Key Management in the Bios Configuration UtilitySecurity Key and RAID Management 100 Local Key Management LKMCreate Security Key Change Security Key 101Delete Security Key 102103 Creating Secured Virtual DisksSecuring Pre-Existing Virtual Disks 104 Instant Secure Erase 105Failure to Delete Security Key Troubleshooting Security Key ErrorsSecured Foreign Import Errors 106Failure to Instant Secure Erase Task on Physical Disks 107108 Discovery Error Message TroubleshootingBios Error Messages Extra Enclosure Error Message110 Cache Data Lost Error MessageMissing Disks in Virtual Disk Error Message 111 Previous Configuration of Disks Removed Error MessageMissing Virtual Disks Error Message Corrective Action Enable the ROM option Dirty Cache Data Error MessageBios Disabled Error Message 112113 Drive Configuration Changes Error MessageAdapter at Baseport not Responding Error Message Virtual Disks Partially Degraded Error Message Virtual Disks Offline Error MessageVirtual Disks Degraded Error Message Memory or Battery Problem Error Message115 Firmware Fault State Error MessageForeign Configuration Found Error Message Invalid SAS Topology Detected Error Message Foreign Configuration Not Found in CtrlR Error MessagePrevious Configuration Cleared or Missing Error Message 116117 Multibit ECC Errors Detected Error MessagesConfigured Disks Removed or Not Accessible Error Message Degraded State of Virtual Disks Memory ErrorsBattery Discharged or Disconnected Error Message Corrective ActionPerc Card Has Yellow Bang in Device Manager General IssuesPreserved Cache State Perc Card Not Seen in Device ManagerPhysical Disk in Failed State Physical Disk IssuesUnable to Rebuild a Fault Tolerant Virtual Disk 120Physical Disk Displayed as Blocked Fatal Error or Data Corruption ReportedMultiple Disks Become Inaccessible 121122 Virtual Disk Fails During Rebuild Using a Global Hot SpareRebuilding a Failed Physical Disk 123 Virtual Disk Fails Rebuild Using a Dedicated Hot SparePhysical Disk Takes a Long Time to Rebuild Smart Errors 124Target Disk Fails Replace Member ErrorsSource Disk Fails During Replace Member Operation General Disk Fails126 Linux Operating System ErrorsDriver Does not Auto-Build into New Kernel 127 Unable to Register Scsi Device Error MessageError Message Disk Carrier LED Indicators 128129 Appendix RAID DescriptionSummary of RAID Levels 130 RAID TerminologyDisk Striping Parity Data Disk MirroringSpanned RAID Levels 131Figure A-3. Example of Distributed Parity RAID Figure A-4. Example of Dual Distributed Parity RAIDIndex 133RAID 134135 136
Related manuals
Manual 87 pages 32.25 Kb

H310, H710, H710P, H810 specifications

Dell offers a range of storage controller technologies, notably the H810, H710, H710P, and H310, which cater to different enterprise needs. These controllers are designed to support various storage configurations, enhancing overall system performance and reliability.

The Dell H810 is a high-performance PCIe 3.0 RAID controller that supports up to eight internal drives and is particularly suited for demanding workloads. It features advanced RAID levels including RAID 0, 1, 5, 6, 10, 50, and 60, providing flexibility for various data protection strategies. The H810 also supports up to 32TB of storage capacity, making it suitable for environments that require substantial data management capabilities.

The H710 is another powerful RAID controller, widely recognized for its balance of performance and cost-efficiency. It features 1GB of cache memory, which aids in accelerating read and write operations. The H710 supports the same RAID levels as the H810 and allows for up to 512MB of non-volatile memory. This ensures data integrity even in the event of a power failure, making it reliable for critical applications.

The H710P is an enhanced version of the H710, with a significant upgrade in its cache capabilities. It offers 2GB of battery-backed cache memory, further enhancing data processing speeds and improving responsiveness. The H710P is ideal for intensive workloads and virtualization, where rapid access to data is essential. This controller also includes features such as RAID storage pooling, intelligent data tiering, and support for multiple virtual disks.

Finally, the H310 is a cost-effective option for small to medium-sized businesses or those with less demanding storage requirements. It offers similar RAID support as the higher-end controllers but operates with a simpler architecture. The H310 features 512MB of cache, providing sufficient performance for regular workloads without the additional complexities of more advanced controllers.

In summary, Dell's H810, H710, H710P, and H310 storage controllers each serve distinct purposes, providing various features, technologies, and performance characteristics tailored to different business needs. From high-capacity storage solutions to user-friendly setups, Dell’s offerings ensure that organizations can efficiently manage their data storage requirements.
Top Page Image Contents