Dell FL100, FE100 manual Configuring Storage Systems Low-Level Configuration

Page 39

C H A P T E R 5

Configuring Storage Systems (Low-Level Configuration)

This chapter provides the necessary steps for configuring the Dell PowerVault shared storage hard-disk drives attached to the PowerEdge Cluster FE100/FL100 Datacenter Server configuration.

NOTES: Prior to installing the operating system, be sure to make the necessary low- level software configurations (if applicable) to your PowerEdge FE100/FL100 Data- center Server cluster.

Before you configure the cluster software, verify that your system hardware is prop- erly cabled for clustering. See Chapter 4, “Cabling the Cluster Hardware“for instructions on connecting the components of your PowerEdge FE100/FL100 Data- center Server cluster.

Configuring PowerVault Shared Storage Hard-Disk Drives

This section provides some of the necessary procedures for configuring the low-level connections between the cluster nodes and the storage system.

The PowerVault shared storage system hard-disk drives must be configured before use. The following subsections provide information on these configurations.

For additional information for configuring low-levelconnections between the cluster nodes and the storage systems, see the following chapters:

Chapter 6, “Configuring the System Software”

Chapter 7, “Installing Cluster Management and Systems Management Software”

Chapter 8, “Upgrading Your PowerEdge System to a Cluster Configuration”

Chapter 9, “Maintaining the Cluster”

Chapter 10, “SAN Components”

support.dell.com

Configuring Storage Systems (Low-Level Configuration) 5-1

Image 39
Contents USER’S Guide Page Preface Other Documents You May Need Warranty and Return Policy InformationTypographical Conventions Example del drive path filename /p Contents Configuring Storage Systems Low-Level Configuration Configuring the System SoftwareCabling the Cluster Hardware Upgrading Your PowerEdge System to a Cluster Configuration Installing Cluster Management Systems Management SoftwareSAN Components Maintaining the ClusterTables Index FiguresXiv Overview of Microsoft Windows 2000 Datacenter Server Getting StartedUser’s Guide Shows an advanced SAN-attached cluster configuration SAN-Attached Cluster ConfigurationSAN-Attached Cluster Configuration PowerEdge Cluster FE100/FL100 IdentificationActiven/Active and Activen/Passive Configurations PowerEdge Cluster FE100/FL100 ConfigurationsActiven/Active and Activen/Passive Configuration Types Disadvantages Failover and Failback Support+1 Failover AdvantageMultiway Failover N+1 Failover Configuration for a 4-Node ClusterExample of a 4-Node Multiway Failover Configuration Cascading FailoverDisadvantage Advantages Way MigrationFailover Configurations Example of a 4-Node N-Way Migration SolutionCluster Nodes Cluster StorageCluster Interconnect Connections Private Network Operating System and System Management Software Cluster Client Network Connections Public NetworkCluster Node Requirements PowerEdge Cluster FE100/FL100 Shared Storage Requirements SAN-Attached Cluster Requirements SAN-Attached Cluster RequirementsUser’s Guide Installation Overview User’s Guide Adding Peripherals to Your Cluster Preparing PowerEdge and PowerVault Systems for ClusteringConfiguring PowerVault DPE and DAE Enclosure Addresses Configuring Fibre Channel HBAs on Separate PCI BusesCluster Cabling Components Cabling the Cluster HardwareDB-9 Connector Fibre Channel Copper ConnectorsUsing NICs in Your Public Network Cabling Your Public NetworkCabling Your Private Network Using Giganet cLAN for the Private Network Connecting Standby Power Supplies in the PowerVault System Protecting Your Cluster From Power FailureCabling Your Mouse, Keyboard, Monitor in a Dell Rack Cable Configuration of PowerVault 65xF Power SuppliesConfiguring PowerVault Shared Storage Hard-Disk Drives Configuring Storage Systems Low-Level ConfigurationRAID Level for the Internal Scsi Hard-Disk Drives Configuring Internal Scsi Hard-Disk DrivesConfiguring the System Software Configuring the Cluster Nodes in a Windows 2000 Domain Configuring the Windows 2000 Cluster Service Static IP Address Configuring the Public and Private NetworksIP Addresses for the Private Network Configuring the IP Addresses for the Private NetworkIP Addresses IP Addresses Updating the Host Bus Adapter Driver Dell OpenManage Software Dell OpenManage Storage Management SoftwareDell OpenManage Description Cluster Product Nodes Configuring the System Software Using the Windows 2000 Dynamic Disks and Volumes Verifying Cluster Readiness Installing and Configuring the Windows 2000 Cluster ServiceCluster Resource Group Verifying Cluster Service Verifying Cluster FunctionalityVerifying Cluster Resource Availability Open the Agent Configurator Configuring the Data Agent for Cluster FailoverOpen the Cluster Administrator Resource Type menu, select Generic ServiceRight-clickCluster Group and select Bring Online Failover Support Through Four-Node Clustering Configuring Failover and Failback SupportModifying the Failover Sequence of the Disk Groups User’s Guide Installing Cluster Management Systems Management Software Microsoft Cluster AdministratorRunning Cluster Administrator on a Cluster Node User’s Guide Support.dell.com User’s Guide Upgrading Your PowerEdge System to a Cluster Configuration User’s Guide Maintaining the Cluster Identifying the Cluster Name Connecting to Data Agent Using Data AdministratorIdentifying the Device Name of the Storage Processor Connecting to Data Agent Using Data SupervisorOpen a Command Prompt window Determining the RAID Levels of the Shared Disk VolumesAdding a Third NIC to a Cluster Node Start the Dell OpenManage Data Agent ConfiguratorMake New Connection wizard starts Cluster Nodes and Component IdentificationChanging the IP Address of a Cluster Node Uninstalling Cluster Service Running chkdsk /f on a Quorum DiskReplacing a Cluster Node Maintaining the Cluster User’s Guide SAN Components Overview of a PowerVault SANSAN-Attached Clusters Fibre Channel Fabrics Attaching a SAN-Attached Cluster Configuration to a Network PowerEdge server Fibre Channel switch Bridge PowerVault 130T Using Dell PowerVault Fibre Channel Switches SAN Components Additional PowerEdge Cluster Maintenance Procedures Table A-1. General Cluster Troubleshooting TroubleshootingTable A-2. Windows 2000 Troubleshooting Troubleshooting WindowsCluster Data Sheets Cluster Type PowerEdge Cluster FE100/FL100 Datacenter Server Cluster Data Sheets Pre-Installation SettingsConfigure Storage Subsystem Components User’s Guide Cluster Service Configuration Post-Microsoft Cluster Service Installation Windows 2000 Datacenter Server Settings Microsoft Cluster Service Installation Configuring the Shared Storage SystemIndex User’s Guide SAN-attached clusters Attaching a PowerVault storage system User’s Guide
Related manuals
Manual 12 pages 2.34 Kb Manual 24 pages 52.77 Kb Manual 2 pages 8.37 Kb Manual 56 pages 60.33 Kb

FL100, FE100 specifications

The Dell FE100, FL100, FL200, and FE200 are part of Dell's lineup of advanced networking switches designed to cater to the increasing demand for efficient data handling in enterprise environments. These switches combine powerful performance with a range of features that ensure scalability, reliability, and ease of management.

The Dell FE100 is a compact yet robust switch that caters primarily to small and medium-sized businesses. It provides gigabit connectivity with multiple ports for enhanced network performance. The FE100 is equipped with layer 2 capabilities, which offer essential features such as VLAN support, port mirroring, and link aggregation, ensuring seamless data flow across the network.

In contrast, the Dell FL100 stands out with its advanced layer 3 functionality. This switch is designed for more complex enterprise environments where routing capabilities are necessary. The FL100 supports static and dynamic routing protocols, which enhance network efficiency and traffic management. Furthermore, its Quality of Service (QoS) features enable prioritization of critical applications, optimizing network resources.

Moving up the lineup, the Dell FL200 offers increased port density and enhanced performance metrics. It caters to high-traffic networks with features such as enhanced security protocols and advanced traffic management capabilities. The FL200 integrates seamlessly into larger network infrastructures and is designed to support advanced IPv6 routing, ensuring future-proofing in an evolving technological landscape.

Finally, the Dell FE200 switch is a high-performance, enterprise-grade solution suited for environments that demand maximum throughput and minimal latency. It offers dual-speed capability, supporting both 10GbE and 1GbE connections. The FE200 is characterized by its high level of robustness and redundancy features, including dual power supplies, which safeguard against potential downtime. The switch also provides comprehensive management tools, enabling network administrators to monitor and configure the network seamlessly.

In conclusion, the Dell FE100, FL100, FL200, and FE200 switches represent a versatile and powerful range of networking devices tailored to meet various business needs. With a blend of advanced features, scalability options, and exceptional performance characteristics, these switches are invaluable assets for organizations aiming to optimize their network infrastructure. Whether for small setups or large enterprises, Dell's networking solutions provide reliability and efficiency in today’s fast-paced digital landscape.