Dell R220 owner manual Boot Settings Screen, Integrated Devices Screen

Page 17

Menu Item	Description
Port A	Auto enables BIOS support for the device attached to SATA port A. By default, Port
	A is set to Auto.
Port B	Auto enables BIOS support for the device attached to SATA port B. By default, Port
	B is set to Auto.
eSATA	Auto enables BIOS support for the device attached to the eSATA port . By default,
	eSATA port is set to Auto.

NOTE: Ports A and B are used for the hard drives, eSATA port is used for external hard drives and for the optical drive (CD/DVD).

Boot Settings Screen

Menu Item	Description
Boot Mode	Allows you to set the boot mode of the system.
	CAUTION: Switching the boot mode may prevent the system from booting if
	the operating system is not installed in the same boot mode.
	If the operating system supports UEFI, you can set this option to UEFI. Setting this
	field to BIOS allows compatibility with non-UEFI operating systems. By default, the
	Boot Mode option is set to BIOS.
	NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this
	field to BIOS disables the UEFI Boot Settings menu.

Boot Sequence Allows you to enable or disable the boot sequence retry feature. If this field is

Retryenabled and the system fails to boot, the system reattempts the boot sequence after 30 seconds. By default, the Boot Sequence Retry option is set to Disabled.

BIOS Boot Settings Allows you to enable or disable BIOS Boot options.

NOTE: This option is enabled only if the boot mode is BIOS.

UEFI Boot Settings Allows you to enable or disable UEFI Boot options. The Boot options include IPv4 PXE and IPv6 PXE. By default, the UEFI PXE boot protocol is set to IPv4.

NOTE: This option is enabled only if the boot mode is UEFI.

One-Time Boot Allows you to enable or disable a one-time boot from a selected device.

Integrated Devices Screen

Menu Item

Description

User Accessible Allows you enable or disable the user accessible USB ports. Selecting Only Back

USB Ports Ports On disables the front USB ports and selecting All Ports Off disables both front and back USB ports. By default, the User Accessible USB Ports option is set to All Ports On.

Internal USB Port Allows you to enable or disable the internal USB port. By default, the Internal USB Port option is set to On.

17

Image 17

Contents Dell PowerEdge R220 Page Contents Page Using System Diagnostics Troubleshooting Your SystemJumpers And Connectors Technical Specifications System MessagesGetting Help About Your System Front-Panel Features And IndicatorsSee Getting Help Back-Panel Features and Indicators Back-Panel Features And IndicatorsRelated Documentation NIC Indicator CodesQuick Resource Locator Using The System Setup And Boot Manager Entering System Setup Choosing The System Boot ModeResponding To Error Messages Using The System Setup Navigation Keys System Bios Screen System Setup Options System Setup Main Screen System Information Screen Memory Settings ScreenSata Settings Screen Processor Settings ScreenIntegrated Devices Screen Boot Settings ScreenSerial Communications Screen TimerSystem Security Screen System Profile Settings ScreenPower Button Miscellaneous SettingsAssigning a System And/Or Setup Password System And Setup Password FeaturesUsing Your System Password To Secure Your System Deleting Or Changing An Existing Setup PasswordUsing The Boot Manager Navigation Keys Entering The Uefi Boot ManagerOperating With a Setup Password Enabled Uefi Boot Menu Boot Manager ScreenEntering The iDRAC Settings Utility IDRAC Settings UtilityChanging The Thermal Settings Embedded System ManagementInstalling The Front Bezel Installing System ComponentsRecommended Tools Front Bezel OptionalOpening The System Opening And Closing The SystemClosing The System Inside The SystemRemoving The Chassis Intrusion Switch Chassis Intrusion SwitchRemoving The Optical Drive Installing The Chassis Intrusion SwitchOptical Drive Optional Removing and Installing the Optical Drive Installing The Optical DriveRemoving a 3.5 Inch Hard-Drive Cage Hard DrivesHard-drive cage Removing a 3.5 Inch Hard Drive From The Hard-Drive Cage Installing a 3.5 Inch Hard-Drive CageRemoving a 2.5 Inch Hard-Drive Cage Installing a 3.5 Inch Hard Drive Into The Hard-Drive CageRemoving and Installing a 2.5 Inch Hard-Drive Cage Installing a 2.5 Inch Hard-Drive CageRemoving a 2.5 Inch Hard Drive From The Hard-Drive Cage Installing a 2.5 Inch Hard Drive Into The Hard-Drive CageRemoving The LED Module LED ModuleRemoving The Control-Panel Board Installing The LED ModuleControl-Panel Board Removing and Installing the Control-Panel Board Installing The Control-Panel BoardRemoving a Cooling Fan Cooling FansRemoving and Installing a Cooling Fan Installing a Cooling FanRemoving The Cooling Shroud Cooling ShroudSystem Memory Installing The Cooling ShroudSample Memory Configurations General Memory Module Installation GuidelinesRemoving the Memory Module Removing Memory ModulesInstalling Memory Modules Internal USB Memory Key Optional Removing And Installing The Internal USB KeyExpansion Card Types And Form Factor Expansion Card Installation GuidelinesExpansion Cards And Expansion-Card Risers Removing An Expansion Card Removing and Installing the Expansion Card on the RiserRemoving The Expansion-Card Riser Installing An Expansion CardRemoving and Installing the Expansion-Card Riser Installing The Expansion-Card RiserRemoving The iDRAC7 Enterprise Card IDRAC7 Enterprise Card OptionalInstalling The iDRAC7 Enterprise Card System BatteryReplacing the System Battery Replacing The System BatteryRemoving The Processor ProcessorRemoving and Installing the Processor Heat Sink Removing and Installing a Processor Installing The ProcessorRemoving The Power Supply Unit Power Supply UnitRemoving and Installing the Power Supply Unit Installing The Power SupplyRemoving The System Board System BoardRemoving and Installing the System Board Installing The System BoardPage Troubleshooting External Connections Troubleshooting Your SystemTroubleshooting The Video Subsystem Troubleshooting a USB DeviceTroubleshooting a NIC Troubleshooting a Serial I/O DeviceTroubleshooting a Damaged System Troubleshooting a Wet SystemTroubleshooting The Power Supply Troubleshooting The System BatteryTroubleshooting System Memory Troubleshooting Cooling ProblemsTroubleshooting Cooling Fans Troubleshooting An Internal USB Key Troubleshooting An Optical Drive Troubleshooting An SD CardTroubleshooting Expansion Cards Troubleshooting a Hard DriveTroubleshooting The Processor Dell Embedded System Diagnostics Using System DiagnosticsWhen To Use The Embedded System Diagnostics Running The Embedded System DiagnosticsDisplayed if at least one event description is recorded System Board Jumper Settings Jumpers And ConnectorsINTUSB1 System Board ConnectorsDisabling a Forgotten Password Udimm Technical SpecificationsUSB 300 Å/month per Class G1 as defined by ANSI/ISA71.04-1985 Page System Messages System Error MessagesASR0003 Message CPU0023 Message CPU0703 Message FAN0001 Message MEM0007 Message PCI1302 Message PCI1360 Message SEC0033 Message Alert Messages Diagnostic MessagesGetting Help Locating Your System Service TagContacting Dell Documentation Feedback

Related manuals

Manual 98 pages 50.8 Kb