Dell R220 owner manual MEM0007 Message

Page 87

Error Code

Message Information

 

MEM0007

Message

Unsupported memory configuration; check memory device

 

 

 

at location <location>.

 

Details

The memory may not be seated correctly, misconfigured, or

 

 

has failed. Memory size is reduced.

 

Action

Check the memory configuration. Re-seat the memory

 

 

modules. If the issue persists, see Getting Help.

MEM0701

Message

Correctable memory error rate exceeded for <location>.

 

 

Details

The memory may not be operational. This an early indicator

 

 

of a possible future uncorrectable error.

 

Action

Re-seat the memory modules. If the issue persists, see

 

 

Getting Help.

MEM0702

Message

Correctable memory error rate exceeded for <location>.

 

 

Details

The memory may not be operational. This an early indicator

 

 

of a possible future uncorrectable error.

 

Action

Re-seat the memory modules. If the issue persists, see

 

 

Getting Help.

MEM1205

Message

Memory mirror redundancy is lost. Check memory device at

 

 

 

location(s) <location>.

 

Details

The memory may not be seated correctly, misconfigured, or

 

 

has failed.

 

Action

Check the memory configuration. Re-seat the memory

 

 

modules. If the issue persists, see Getting Help.

MEM1208

Message

Memory spare redundancy is lost. Check memory device at

 

 

 

location <location>.

 

Details

Memory sparing is no longer available.

 

Action

Re-seat the memory modules. If the issue persists, see

 

 

Getting Help.

MEM8000

Message

Correctable memory error logging disabled for a memory

 

 

 

device at location <location>.

 

Details

Errors are being corrected but no longer logged.

 

Action

Review system logs for memory exceptions. Reinstall

 

 

memory at location <location>.

87

Image 87
Contents Dell PowerEdge R220 Page Contents Page Technical Specifications System Messages Troubleshooting Your SystemUsing System Diagnostics Jumpers And ConnectorsGetting Help About Your System Front-Panel Features And IndicatorsSee Getting Help Back-Panel Features and Indicators Back-Panel Features And IndicatorsRelated Documentation NIC Indicator CodesQuick Resource Locator Using The System Setup And Boot Manager Using The System Setup Navigation Keys Choosing The System Boot ModeEntering System Setup Responding To Error MessagesSystem Setup Options System Setup Main ScreenSystem Bios Screen System Information Screen Memory Settings ScreenSata Settings Screen Processor Settings ScreenIntegrated Devices Screen Boot Settings ScreenSerial Communications Screen TimerSystem Security Screen System Profile Settings ScreenPower Button Miscellaneous SettingsAssigning a System And/Or Setup Password System And Setup Password FeaturesUsing Your System Password To Secure Your System Deleting Or Changing An Existing Setup PasswordEntering The Uefi Boot Manager Operating With a Setup Password EnabledUsing The Boot Manager Navigation Keys Uefi Boot Menu Boot Manager ScreenEmbedded System Management IDRAC Settings UtilityEntering The iDRAC Settings Utility Changing The Thermal SettingsFront Bezel Optional Installing System ComponentsInstalling The Front Bezel Recommended ToolsOpening The System Opening And Closing The SystemClosing The System Inside The SystemRemoving The Chassis Intrusion Switch Chassis Intrusion SwitchInstalling The Chassis Intrusion Switch Optical Drive OptionalRemoving The Optical Drive Removing and Installing the Optical Drive Installing The Optical DriveRemoving a 3.5 Inch Hard-Drive Cage Hard DrivesHard-drive cage Removing a 3.5 Inch Hard Drive From The Hard-Drive Cage Installing a 3.5 Inch Hard-Drive CageRemoving a 2.5 Inch Hard-Drive Cage Installing a 3.5 Inch Hard Drive Into The Hard-Drive CageRemoving and Installing a 2.5 Inch Hard-Drive Cage Installing a 2.5 Inch Hard-Drive CageRemoving a 2.5 Inch Hard Drive From The Hard-Drive Cage Installing a 2.5 Inch Hard Drive Into The Hard-Drive CageRemoving The LED Module LED ModuleInstalling The LED Module Control-Panel BoardRemoving The Control-Panel Board Removing and Installing the Control-Panel Board Installing The Control-Panel BoardRemoving a Cooling Fan Cooling FansRemoving and Installing a Cooling Fan Installing a Cooling FanRemoving The Cooling Shroud Cooling ShroudSystem Memory Installing The Cooling ShroudSample Memory Configurations General Memory Module Installation GuidelinesRemoving the Memory Module Removing Memory ModulesInstalling Memory Modules Internal USB Memory Key Optional Removing And Installing The Internal USB KeyExpansion Card Installation Guidelines Expansion Cards And Expansion-Card RisersExpansion Card Types And Form Factor Removing An Expansion Card Removing and Installing the Expansion Card on the RiserRemoving The Expansion-Card Riser Installing An Expansion CardRemoving and Installing the Expansion-Card Riser Installing The Expansion-Card RiserRemoving The iDRAC7 Enterprise Card IDRAC7 Enterprise Card OptionalInstalling The iDRAC7 Enterprise Card System BatteryReplacing the System Battery Replacing The System BatteryRemoving The Processor ProcessorRemoving and Installing the Processor Heat Sink Removing and Installing a Processor Installing The ProcessorRemoving The Power Supply Unit Power Supply UnitRemoving and Installing the Power Supply Unit Installing The Power SupplyRemoving The System Board System BoardRemoving and Installing the System Board Installing The System BoardPage Troubleshooting a USB Device Troubleshooting Your SystemTroubleshooting External Connections Troubleshooting The Video SubsystemTroubleshooting a NIC Troubleshooting a Serial I/O DeviceTroubleshooting a Damaged System Troubleshooting a Wet SystemTroubleshooting The Power Supply Troubleshooting The System BatteryTroubleshooting Cooling Problems Troubleshooting Cooling FansTroubleshooting System Memory Troubleshooting An Internal USB Key Troubleshooting An Optical Drive Troubleshooting An SD CardTroubleshooting Expansion Cards Troubleshooting a Hard DriveTroubleshooting The Processor Running The Embedded System Diagnostics Using System DiagnosticsDell Embedded System Diagnostics When To Use The Embedded System DiagnosticsDisplayed if at least one event description is recorded System Board Jumper Settings Jumpers And ConnectorsINTUSB1 System Board ConnectorsDisabling a Forgotten Password Udimm Technical SpecificationsUSB 300 Å/month per Class G1 as defined by ANSI/ISA71.04-1985 Page System Messages System Error MessagesASR0003 Message CPU0023 Message CPU0703 Message FAN0001 Message MEM0007 Message PCI1302 Message PCI1360 Message SEC0033 Message Alert Messages Diagnostic MessagesDocumentation Feedback Locating Your System Service TagGetting Help Contacting Dell
Related manuals
Manual 98 pages 50.8 Kb