Dell A03, R610 owner manual Removing the Internal USB Cable, USB memory key

NOTE: To avoid interference with other components, the maximum allowable dimensions of the USB key are 24 mm (.94 in) wide x 79 mm (3.11 in) long x 8.6 mm (.33 in) high.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System."

3Locate the USB connector on the control panel board. See Figure 3-11.

4Insert the USB memory key into the USB connector.

5Close the system. See "Closing the System."

6Reconnect the system to power and restart the system.

Figure 3-11. Removing or Installing the Internal USB Memory Key

1 3

2

1 control panel board 2 USB memory key connector

3 USB memory key

Internal USB Cable

Removing the Internal USB Cable

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Installing System Components

99