Compaq ML350 To replace an expansion board, reverse steps 2 through, Removing the expansion board

Removal and Replacement Procedures

6.Press on the top of the expansion slot latch (1) and open the latch toward the rear of the chassis (2).

7.Remove the expansion board (3).

8.Close the expansion slot latch.

9.Replace the expansion board retainer if the expansion board is not immediately being replaced.

2

1

3

Figure 2-25: Removing the expansion board

To replace an expansion board, reverse steps 2 through 9.

2-28 Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide