QuickSpecs
HP ProLiant DL585 Generation 2 (G2)
Technical Specifications
Altitude | Operating | 3050 m (10,000 ft). This value may be limited |
|
| by the type and number of options installed. |
|
| Maximum allowable altitude change rate is 457 |
|
| m/min (1500 ft/min). |
| 9144 m (30,000 ft). Maximum allowable | |
|
| altitude change rate is 457 m/min (1500 |
|
| ft/min). |
Acoustic Noise | Listed are the declared | |
| average bystander position | |
| the product is operating in a 23°C ambient environment. Noise emissions | |
| were measured in accordance with ISO 7779 (ECMA 74) and declared in | |
| accordance with ISO 9296 (ECMA 109). | |
| Idle |
|
| L WAd | 7.7 B |
| L pAm | 58 dBA |
| Operating |
|
| L WAd | 7.7 B |
| L pAm | 58 dBA |
|
|
|
24X Max (or higher) IDE Disk | Applicable Disk | |
|
| |
|
| |
|
| Photo CD (Single and |
|
| Mixed Mode (Audio and Data combined) |
| Capacity | 540 MB (Mode 1, 12 cm) |
|
| 650 MB (Mode 2, 12 cm) |
| Diameter | 4.7 x 3.15 in (12 x 8 cm) |
| Rotational Speed | 4200 rpm maximum |
| Centre Hole | 0.6 in/15 mm diameter |
| Thickness | 1.2 mm |
| Track Pitch | 1.6 µm |
Block Size | Mode 1 | 2,048 |
| Mode 2 | 2,340, 2,336, 1,024 bytes |
| 2,352 bytes | |
| 2,328 bytes | |
Interface | IDE (ATAPI) |
|
Access Times (typical) | Random | 100 ms |
| 2000 ms | |
Audio Output Level | 0.7 Vrms at 47 kOhms | |
| Headphone | 0.6 Vrms at 32 kOhms (maximum volume) |
Data Transfer Rate | Sustained | 150 KB/s (sustained 1X) |
| Burst | 2100 to 3600 KB/s |
Cache Buffer | 128 KB |
|
| < 7seconds |
|
DA - 12575 Canada — Version 37 — May 28, 2008 | Page 42 |