Firmware Update Instructions
If creating a diskette for updating your I/O option firmware only:
$!
$! make_rhods2io.com $!
$ inquire ignore "Insert blank HD floppy in DVA0, then continue" $ set verify
$ set proc/priv=all
$ init /density=hd/index=begin dva0: rhods2io
$ mount dva0: rhods2io
$ create /directory dva0:[as4x00] $ create /directory dva0:[options]
$ copy as4x00fw.sys dva0:[as4x00]as4x00fw.sys $ copy as4x00io.sys dva0:[as4x00]as4x00io.sys $ copy rhreadme.sys dva0:[as4x00]rhreadme.sys $ copy cipca420.sys dva0:[options]cipca420.sys $ copy dfxaa320.sys dva0:[options]dfxaa320.sys $ copy kzpsaa12.sys dva0:[options]kzpsaa12.sys $ dismount dva0:
$ set noverify $ exit
Once created your diskettes can then be used to update firmware by invoking the update utility via the LFU command. Please read Section 2.1 for details on the LFU update method for systems being update from version V5.1 or earlier.
2.2.5Updating Off Network Via Your Local MOP Server
Use one of the following methods for Network updates.
2.2.5.1Updating Off Network via BOOT command
Copy the following file to your local MOP server’s MOM$LOAD directory, for using the BOOT command, e.g. "P00>>>boot ewa0
as4100_V6_0.sys
2.2.5.2Updating Off Network via LFU command
Copy all of the following files to your local MOP server’s MOM$LOAD directory, if using the LFU command, e.g. "P00>>>lfu". Answer the update utility questions for your load device with the network controller, eg. "ewa0" and for the firmware files list with the default filename, eg. "as4x00fw". Please read Section 2.1 for details on the LFU update method for systems being update from version V5.1 or earlier.
as4x00cp.sys
as4x00fw.sys
as4x00io.sys
cipca420.sys
dfxaa320.sys
kzpsaa12.sys
rharcrom.sys
rhreadme.sys
rhsrmrom.sys