Chapter 4 - LED Patterns | 10 |
Chapter 4 - LED Patterns
Some of the LEDs on the front of the IntraPort Carrier VPN Access Server serve dual func- tions. In addition to indicating certain
ϖNote: Any continuous flashing pattern not noted in this chapter may be caused by a hard- ware failure. Please call Compatible Systems Technical Support if your server shows a hard- ware failure.
Server LED Patterns
Over Temp
The server is above the proper operating temperature. The filter needs changing. See the appendices in the IPC Chassis manual for instructions.
Sys Ready
The server booted properly without detecting any failures.
General Indicators
|
|
|
|
|
|
| Ethernet Lights | Load Lights | Indication |
|
|
|
|
|
|
|
|
|
|
|
| 5 flashing | 20 flashing | Server stacks starting up. |
|
|
|
|
|
|
| 3&4 flashing | 40&60 flashing | No OS loaded. Running from ROM. |
|
|
|
|
|
|
| 1&4 flashing | 40&100 flashing | Erasing OS in Flash ROM. |
|
|
|
|
|
|
| 5 flashing | 20,40&60 flashing | Erasing config in Flash ROM. |
|
|
|
|
|
|
| Scanning from the outside toward the center | Flash ROM erase due to switch setting five or six is | |
|
|
|
| complete. Set switch to zero and cycle power. |
|
|
|
|
|
Ethernet Traffic Indicators
TX: Ethernet transmit packet
RX: Ethernet receive packet
Load % Indicators
These lights indicate the load on the DES card.