Compatible Systems 10/100 Configuring the Server for IP and IPX Client Tunnels, VPN User Database

Page 9

Chapter 2 - Basic Configuration Guide

6

Configuring the Server for IP and IPX Client Tunnels

To configure the IntraPort Carrier for IP and IPX client tunnels, each user must be entered into the VPN user database (or into a RADIUS server database) and assigned a tunnel configura- tion.

Required for Client Tunnel Configurations

These are the basic parameters for a tunnel configuration:

•Name of configuration

•Bind To port

•Local IP Net and/or Local IPX Network

•Reachable IP networks

•VPN Group DLCI

CV: Use the VPN Group Configuration Dialog Box to create and name a tunnel configura- tion. Use the General tab to set the Bind To port. Use the IP Connection tab to set the Local IP Net and add IP network numbers and masks which will be reachable via the tunnel configuration. Use the IPX Connection tab to set the Local IPX Network. The VPN Group DLCI can only be set via text-based configuration.

TB: Use the configure command and create and name a VPN Group Name section. Then set the BindTo, LocalIPNet, IPNet and/or LocalIPXNet, and VPNGroupDLCI keywords in that section.

Suggested for Client Tunnel Configurations

You may want to add or change protection suites, set up filters for the tunnel, set a backup device, etc.

CV: Use the IKE Configuration, IPX Filters, IP Filters and/or Rollover tabs in the VPN Group Configuration Dialog Box.

TB: Use the configure command and set keywords in the VPN Group Name section.

VPN User Database

If you are using a RADIUS server for user authentication, you will need to set up VPN users on that server. If not, then you must enter each user into the VPN user database.

CV: Use the VPN User Dialog Box.

TB: Use the edit config command and set parameters in the VPN Users section.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 10/100 Ethernet DES I/O Card Administrator’s Guide Page Basic Configuration Guide Shipping DefaultsLED Patterns Introduction to the 10-100 Ethernet DES I/0 Card Ethernet Connection Requirements Network InstallationConnecting a Management Console Basic Configuration Guide IPX Protocol IP ProtocolRequired for IPX Suggested for IPXRequired for Client Tunnel Configurations Configuring the Server for IP and IPX Client TunnelsSuggested for Client Tunnel Configurations VPN User DatabaseSetting up Radius Authentication Setting the IntraPort for a Radius ServerRadius Server User Authentication Settings Saving a Configuration File to Flash ROM Shipping Defaults Default PasswordEthernet Interfaces Server LED Patterns LED Patterns

10/100 specifications

Compatible Systems 10/100 is a technology designed for networking devices that allows for efficient data transmission at speeds of 10 megabits per second (Mbps) and 100 megabits per second. This dual capability enables seamless communication in various networking environments, accommodating both older devices that operate at 10 Mbps and newer devices that can utilize the faster 100 Mbps rate. The compatibility aspect is essential for mixed media and legacy systems, ensuring that organizations can transition to faster networks without obsolete older equipment.

One of the primary features of Compatible Systems 10/100 is its auto-negotiation capability. This technology automatically detects the highest possible speed supported by both the device and the network, allowing for optimal performance without manual configuration. This feature simplifies the setup process for users and reduces the potential for connectivity issues, making it ideal for businesses with diverse hardware.

Another critical characteristic of Compatible Systems 10/100 is its support for both Ethernet and Fast Ethernet standards. Ethernet operates at 10 Mbps, while Fast Ethernet, introduced in the mid-1990s, supports speeds of up to 100 Mbps. This flexibility means that organizations can implement a mixed environment while ensuring that they can leverage the benefits of higher-speed connections where necessary.

In terms of physical layer technology, Compatible Systems 10/100 typically employs twisted-pair cabling, following the Category 5 (Cat 5) standard or higher. This cabling supports higher frequencies and reduced crosstalk, enabling reliable data transmission across various distances. Ethernet over twisted pair is widely used due to its cost-effectiveness and ease of installation.

Additionally, the technology incorporates full-duplex communication capabilities, allowing for data transmission and reception simultaneously, effectively doubling the potential throughput without interference. This feature is particularly advantageous in busy network environments, ensuring that data packets can flow freely without congestion.

Overall, Compatible Systems 10/100 serves as a robust solution for organizations looking to maintain compatibility with legacy systems while incorporating the advancements of modern networking technologies. Its combination of auto-negotiation, support for multiple standards, and reliance on reliable cabling infrastructure allows businesses to scale their networks efficiently and effectively. As they move towards higher speeds and advanced technologies, the foundation provided by Compatible Systems 10/100 remains indispensable.
Top Page Image Contents