Chapter 2 - Basic Configuration Guide | 4 |
Chapter 2 - Basic Configuration Guide
This chapter briefly discusses the major parameters that must be set in order to use the
Configuration instructions in this chapter are given for Ethernet 0 on Slot 0. If your server has multiple slots populated, then you will need to repeat this setup for the other interfaces. The slot number comes first and is separated from the interface number by a colon (e.g., Ethernet 1:0, Ethernet 2:0, etc.). If other types of I/O cards are in use, then you will need to consult the Administrator’s Guide for the each I/O card for configuration guidelines.
Detailed information on the meaning of the server’s parameters is provided in the Compati- View Management Software Reference Guide and the
There are a number of parameter settings which are optional, in the sense that they are not required for all installations. These settings are not covered in this chapter.
In this chapter:
CV = CompatiView
TB =
ϖNote: This Basic Configuration Guide does not include information on setting up packet
filters. See the CompatiView Management Software Reference Guide or