Dell FL200 Support for QLogic HBAs on Windows NT, • • • • • • • • • • • •, PowerEdge PowerEdge

PowerEdge Cluster FE100/FL100 Heterogeneous Configurations

Your PowerEdge Cluster FE100/FL100 system supports the following PowerEdge servers as cluster nodes in heterogeneous pairs (mixed server models) with Windows NT 4.0, Enterprise Edition:

•

•

•

•

•

•

•

•

•

•

•

•

PowerEdge 2400-4300

PowerEdge 2450-4350

PowerEdge 4400-2400

PowerEdge 4400-4300

PowerEdge 6300-4300

PowerEdge 6300-6100

PowerEdge 6350-4350

PowerEdge 6400-4400

PowerEdge 6400-6300

PowerEdge 6450-6350

PowerEdge 8450-6350

PowerEdge 8450-6450

NOTES: Both nodes must be configured with identical operating systems and service packs, similar drivers (network interface controllers [NICs], Fibre Channel host bus adapter [HBAs], and so on), utilities (Dell OpenManage™ system management soft- ware, and so on), and Fibre Channel HBA basic input/output system (BIOS).

Heterogeneous server clusters (mixed server models) are not supported with PowerEdge Cluster FE200/FL200 configurations running Windows NT 4.0.

Both optical and copper HBA connectors are supported in a storage area network (SAN)-attached and SAN appliance-attached configuration. Copper HBA connectors are supported in a direct-attached configuration.

Support for QLogic HBAs on Windows NT

Table 1-1 lists the QLogic HBAs and the PowerEdge servers on which they are sup- ported for Windows NT cluster configurations. Table 1-2 lists the QLogic HBAs and the PowerEdge servers on which they are supported for Windows NT FE200/FL200 cluster configurations. For PCI slot recommendations, see the section for your server model on adding peripherals required for cluster nodes, found later in this document.

support.dell.com Dell PowerEdge Cluster Platform Guide 1-3