Dell FE100, FL100, FE200, FL200 manual Peripherals for PowerEdge 2450 Cluster Nodes

Peripherals for PowerEdge 2450 Cluster Nodes

The following list provides PCI slot assignment information for the system’s PCI buses and HBAs.

•

•

PCI buses

—PCI bus 0: PCI slots 1 through 3 are 32-bit, 33-MHz.

HBAs

—You can install HBAs in any available PCI slot.

Peripherals for PowerEdge 2550 Cluster Nodes

The following list provides PCI slot assignment information for the system’s PCI buses.

•PCI buses

—PCI bus 0: PCI slots 1 through 3 are 64-bit, 33-MHz.

•HBAs

—You can install HBAs in any available PCI slot.

Peripherals for PowerEdge 4300/4350 Cluster Nodes

The following list provides PCI slot assignment information for the system’s PCI buses, HBAs, and the DRAC 2.

•

•

PCI buses

—PCI bus 0: PCI slots 1 through 3 are 32-bit, 33-MHz slots. HBAs

—For dual HBA configurations, Dell recommends installing the HBAs on sepa- rate PCI buses to balance the load on the system.

•DRAC 2

—If you are currently using a DRAC 2 or plan to use one in the future, install it in PCI slot 4.

Peripherals for PowerEdge 4400 Cluster Nodes

The following list provides PCI slot assignment information for the systems’s PCI buses, HBAs, and the DRAC 2.

•PCI buses

—PCI bus 0: PCI slots 1 and 2 are 64-bit, 33/66-MHz.

—PCI bus 1: PCI slots 3 through 6 are 64-bit, 33-MHz.

—PCI bus 2: PCI slot 7 is 32-bit, 33-MHz.

1-8 Dell PowerEdge Cluster Platform Guide