Dell FL100, FE100, FE200, FL200 Windows 2000 Advanced Server, Support for Qlogic HBAs on Windows

Windows 2000 Advanced Server

The PowerEdge Cluster FE100/FL100 and FE200/FL200 support clustering on Windows 2000 Advanced Server. See the following sections for information on sup- ported configurations and service packs. See also the Dell PowerEdge Cluster FE100/FL100 and FE200/FL200 Installation and Troubleshooting Guide for installation instructions for hardware configurations using Windows 2000 Advanced Server.

PowerEdge Cluster FE100/FL100 and FE200/FL200 Homogeneous Configurations

Your PowerEdge Cluster FE100/FL100 and FE200/FL200 configuration supports the following PowerEdge servers as cluster nodes in homogeneous pairs (same server) with Windows 2000 Advanced Server:

•

•

•

•

•

•

•

•

•

•

•

•

PowerEdge 1550-1550

PowerEdge 2400-2400

PowerEdge 2450-2450

PowerEdge 2550-2550

PowerEdge 4300-4300

PowerEdge 4350-4350

PowerEdge 4400-4400

PowerEdge 6300-6300

PowerEdge 6350-6350

PowerEdge 6400-6400

PowerEdge 6450-6450

PowerEdge 8450-8450

NOTE: Heterogeneous server clusters (mixed server models) are not supported with PowerEdge Cluster FE100/FL100 and FE200/FL200 configurations running Windows 2000 Advanced Server.

Support for Qlogic HBAs on Windows 2000

Table 1-3 lists the QLogic HBAs and the PowerEdge servers on which they are sup- ported for Windows 2000 cluster configurations. Table 1-4 lists the QLogic HBAs and the PowerEdge servers on which they are supported for Windows 2000 FE200/FL200 cluster configurations. For PCI slot recommendations, see the section for your server model on adding peripherals required for cluster nodes, found later in this document.

support.dell.com Dell PowerEdge Cluster Platform Guide 1-5