B&B Electronics ESR902W, ESR904W, ESR901W232 manual Power Up, Set Up PC, Configuration, Operation

Introduction

Figure 1. Direct Connection for Configuration

3.Power Up

1.Apply power to the ESR90xW

2.Front panel LED will illuminate with the following sequence:

a.Power LED will always be lit while device is powered

b.Signal Strength LED – White for 5 seconds, blink yellow/Red and go dark.

c.The Link/Activity LED will be red when the device is associating with an access point (if configured to do so)

d.The Link/Activity LED will be green when the device is associated with an access point (if configured to do so)

Note: The device by default is not configured to associate with an access point

Operating System Boot Completion Indication

e.Once the device has booted successfully into the operating system all of the LEDs with the exception of Power will blink once to indicate a completed boot sequence.

f.When this sequence starts all of the LEDs will be lit for one half of a second after which they will resume their previous state.

Figure 2. ESR90xW LEDs

Documentation Number: ESR90xW-4905m Chapter 1 7

Introduction

4.Set Up PC

1.Configure the PC to work in the 192.168.0.x private address range

2.Open a web browser

3.Enter 192.168.0.200 into the address bar of the browser

Figure 3. Web Console Device Information Page

5.Configuration

1.Enter your Username and Password to Login. The default username is “Administrator” with no password.

2.Navigate to Wireless Settings, provide SSID name, configure security settings

3.Navigate to Serial Configuration, set up serial parameters to match your serial device

4.Click Apply and restart the ESR90xW

6.Operation

1.ESR90xW will boot up and attempt to connect to the designated access point

2.The Link LED will light when it makes the connection

3.Communications will occur between the PC and serial device

Figure 4. Infrastructure Mode Operation

8 Chapter 1 Documentation Number: ESR90xW-4905m

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com	B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com