Suggested for IPX

Chapter 2 - Quickstart Instructions

Box (under Global/IP Static Routes) to set static routes. OSPF and BGP can only be config- ured using text-based configuration.

TB: Use configure and set either the RIPVersion keyword or the OSPFEnabled keyword in the IP WAN 0 section. Add static routes and a default router using the edit config IP Static command.

ϖNote: Due to the complexity of BGP, configuration parameters for BGP are not given in this Quickstart. For help with BGP configuration parameters, and other configuration questions, refer to the Tech Support pages on the Compatible Systems Web site at:

http://www.compatible.com/.

IPX Protocol

Required for IPX

Frame Relay operation requires that the WAN interface be set as an IPX “numbered inter- face.” This means that the interface (and thus the Frame Relay network) must have an IPX network number.

•IPX numbered interface

•IPX network number

CV: Use the IPX Routing: WAN Dialog Box.

TB: Use configure and set the Numbered and Net keywords in the IPX WAN 0 section.

The settings above are all that is generally required for IPX operation over Frame Relay.

AppleTalk Protocol

Required for AppleTalk

Frame Relay operation requires that the WAN interface be set as an AppleTalk “numbered interface.” This means that the interface (and thus the Frame Relay network) must have an AppleTalk network number and an AppleTalk node number.

•AppleTalk numbered interface

•AppleTalk network number

•AppleTalk node number

•AppleTalk zone name

CV: Use the AppleTalk Routing: WAN Dialog Box.

TB: Use configure and set the Numbered, NetLower, and DefZone keywords in the Apple- Talk WAN 0 section.

Suggested for AppleTalk

The settings above are all that is generally required for AppleTalk operation over Frame Relay.

DECnet Protocol

Required for DECnet

In order to be used, DECnet must be turned on both globally and for a particular port.

WAN interfaces which are set for Frame Relay operation do not need any additional parame- ters set in order to function.

•Set DECnet on (globally, and for this port)

CV: Use the DECnet Routing Dialog Box (under Global/DECnet Routing) and the DECnet: WAN Dialog Box.