Compatible Systems DS3 manual

Page 2

DS3-Quad 10/100 RIOP Installation Guide, Version 1.0

FCC Notice: This product has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. It is designed to provide reasonable protection against radio or television communication interference in a commercial environment. Operation of this equipment in a residential area could cause interference with radio or television communication.

Image 2

Contents DS3- Quad 10/100 Riop Installation Guide Page Table of Contents Quickstart InstructionsShipping Defaults LED PatternsShipping Defaults Network InstallationQuickstart Configuration Introduction to the DS3-Quad 10/100 RiopDS3 Line Connection Requirements Network InstallationConnecting the DS3-Quad 10/100 to the Ethernet Powering Up the Router Connecting the DS3-Quad 10/100 to a DS3 LineConnecting a Management Console IP Protocol Ethernet Interface ConfigurationQuickstart Instructions Required for IPDECnet Protocol IPX ProtocolAppleTalk Protocol PPP Configuration WAN Interface ConfigurationInternal DS3 CSU/DSU Physical Communications Settings Internal DS3 CSU/DSU Link ConfigurationFrame Relay Configuration Required for IP Unnumbered Interface Frame Relay Dlci MappingsRequired for IP Numbered Interface Suggested for IPX Link Configuration Smds ConfigurationSaving a Configuration File to Flash ROM Smds AddressingWAN Interface Shipping DefaultsEthernet Interfaces Router LED Patterns General IndicatorsLED Patterns Over TempEthernet Connection Indicators Ethernet Traffic IndicatorsDS3 Indicators DS3 Connection Indicators