Avocent ACS 6000 manual Cycle, on, off, lock and unlock, Go to the access level

Page 23

Chapter 2: CLI Command Set 15

set ipv4_method=dhcp

#set ipv4_method=static #ipv4_address=192.168.160.10 #ipv4_ mask=255.255.255.0

#set ipv4_method=ipv4_address_unconfigured #set ipv6_method=stateless

#set ipv6_method=dhcpv6

#set ipv6_method=static #ipv6_address= #ipv6_prefix_length= set ipv6_method=ipv6_address_unconfigured

set mode=auto submit

echo on commit

--:- eth0 cli->

NOTE: Check the configuration of the program used to open a session against the appliance (SSH/Telnet, TeraTerm / HypertTerminal for console, and so on) to avoid the inclusion of a line feed character in lines that exceed terminal width, because this will affect the past operation.

cycle, on, off, lock and unlock

Control power on outlets on a PDU that is either connected to a serial port or to the AUX/Modem port when the port is enabled and configured with the Power Profile.

NOTE: Lock and unlock commands are only supported on Cyclades and Avocent PDUs.

To power control (on, off, cycle) all outlets of PDUs or outlets merged to a target (serial port configured as CAS profile with merged outlets):

1.Go to the access level.

--:- / cli-> cd/access

2.Launch the power command with the argument being the target name or PDU ID.

--:- access cli->[cycleonoff][<PDU_ID>]<target name>]

To power control (on, off, cycle) outlets of one specific PDU:

1.Go to the PDU level under access.

--:- /cli->cd access/<PDU_ID>

2.Launch the power command with a specific outlet (number or name), range of outlets (use a hyphen to specify the range) or list of outlets (number or name separated by a comma).

--:- <PDU_ID> cli->[cycleonoff][<outlet name><outlet number>]

-or-

--:- <PDU_ID> cli->[cycleonoff]<outlet number>-<outlet number]

-or-

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Cyclades ACS Canadian DOC Notice Safety and EMC Approvals and MarkingsFCC Warning Statement Cyclades ACS Symbols Used TA B LE of C on TE N TS Port Access and Configuration Examples Table of Contents Page Introduction, Navigation Commands CLI utility can be accessed in the following ways Access Options and How to Log Into the CLITo start the CLI Configuration Tasks Performed With the CLICli- cdTabTab CLI NavigationPrompt like the following appears at each level Introduction, Navigation and CommandsAutocompletion Parameters Command Line SyntaxSyntax used Page Help Commands Used for the CLIDelete AddSniff PwdConnect Ftp ShareDisconnect Exit/quitRevert ScpSet CommitShow ListconfigurationCycle, on, off, lock and unlock Go to the access levelTo power control on, off, cycle outlets of one specific PDU Go to the PDU level under accessGo to the outlet level for the specific PDU PasswdOpiepasswd Killsharedsession Special Multi-session CommandsWiz ListsharedsessionShowdatabuf and showappliancedatabuf Cleandbuf and cleanappliancedatabufCLI Equivalent Actions to Web Manager Checkbox Selection Page Port Access and Configuration Tasks Port Access and Configuration ExamplesFor Serial Port Access Parameters Field Description For ApplianceFor Power Field For Outlets Port Access and Configuration ExamplesTo connect to a device console connected to a serial port Accessing Serial Ports using tsmenuConnect to a Device Console Connected to a Serial Port To close the target session Manage Power for a Device Connected to an Outlet on a PDUPort Configuration Examples Tsmenu optionsTo enable a power management port To set up a console access service CAS portLog onto the CLI as an administrator Enter show to view the status of portPage Type ls to see available sub-nodes Enter ls to view the available options SystemEnter cd system to navigate to the System level System/Security Options System Navigation Tree System/SecurityEnter cd security to navigate to the security level Date and Time Options Date and Time Navigation Tree CLI Overview for AdministratorsSystem/Date and Time To set the online help URL To set the login bannerSystem/Help and Language System/GeneralSystem/Usage System/Boot ConfigurationEnter show to view the system information System/InformationEnter cd network to navigate to the Network level Network/SettingsEnter show to view the list of available options NetworkNetwork/IPv4 and IPv6 Options IPv4 and IPv6 Navigation Tree To configure a IPv4 or IPv6 static IP addressNetwork/IPv4 and IPv6 Network/DevicesNetwork/Devices Options Devices Navigation Tree Enter show to view the changesNetwork/Hosts To add a host to the host tableType add then press Return Hosts cli-cd 172.26.31.164/settingsEnter cd network/ipsecvpn to navigate to the ipsecvpn level Network/FirewallNetwork/IPSecVPN Enter cd network/firewall to navigate to the firewall level11 Network/IPSecVPN Options IPSecVPN Navigation Tree Wiz commandNetwork/SNMP Enter cd network/snmp to navigate to the snmp level13 Ports Options Ports Navigation Tree PortsEnter cd ports to navigate to the Ports level CLI Overview for Administrators 14 Serial Port Commands CommandSummary Appliance with an internal modem To copy the configuration from serial port 5 to ports 10Auxiliary ports Appliance without an internal modem Pluggable DevicesEnter cd users to navigate to the users level Authentication16 Authentication Options Authentication Navigation Tree UsersEnter save To add a user and passwordEnter show to verify that the new user has been added Syslog19 EventsandLogs Options EventsandLogs Navigation Tree EventsandLogs18 Syslog Options Syslog Navigation Tree To rename a PDU Power ManagementPower Management Options are described in the table below 20 Power Management Options Descriptions Option DescriptionTo view and kill ActiveSessions CLI Overview for Administrators Enter set newpduid=newPDUIDTo manage power for a selected outlet Active Sessions InformationPage Enter shell. a warning appears followed by the root prompt Connect to the console of the console server as rootPage Appendices Access rightsTable B.1 Access Rights Groups Members Permissions Appendix B Migration CLIConfig administration notifications Table B.2 Commands Not Supported by the Migration CLIAdministration Config administration bootconfConfig physicalports databuffering Command Value or DescriptionsConfig network hostSettings Config physicalports accessConfig security profile custom Config physicalports power managementConfig security loadkey Url Username Page Table C.1 Su Command Options OptionDescription Appendix C Su and Sudo CommandsSu command Run the groups command to verifyTo delete a member from the wheel group Configuring sudoSudo command Page Page Appendix D Technical Support To resolve an issuePage For Technical Support
Related manuals
Manual 70 pages 12.94 Kb

ACS 6000 specifications

The Avocent ACS 6000 is a leading edge solution designed for remote access and management of critical IT infrastructure. This compact and robust device serves as a key tool for IT administrators, allowing them to manage serial console access for servers, networking equipment, and other serially controlled devices. Ideal for both enterprise environments and smaller settings, the ACS 6000 enhances operational efficiency and reliability.

One of the standout features of the Avocent ACS 6000 is its ability to provide secure remote access. The device supports various security protocols, including SSH, SSL, and IP filtering, ensuring that access to the managed devices is protected against unauthorized entry. With strong encryption standards, it provides peace of mind for organizations handling sensitive data.

The ACS 6000 is equipped with advanced management capabilities, enabling administrators to monitor and control serial communications across multiple devices from a single interface. This centralized management not only reduces the complexity associated with handling numerous individual devices, but it also streamlines troubleshooting and system diagnostics, resulting in quicker response times and less downtime.

Another notable characteristic of the ACS 6000 is its scalability. The modular design allows for easy expansion as organizational needs evolve. IT managers can begin with a basic configuration and upgrade seamlessly by adding more ports or features as necessary. This flexibility makes the ACS 6000 an ideal solution for growing organizations.

User-friendly features such as an intuitive web interface simplify the setup and configuration process. Through this interface, users can easily navigate and utilize various functions, including alert settings, logging, and reporting features that provide valuable insights into device performance and usage patterns.

In addition to its robust functionality, the ACS 6000 is designed with reliability in mind. Built to endure varied environmental conditions, it operates reliably in data centers and remote locations alike. The device can also handle high-voltage operations, making it versatile for various industrial applications.

In summary, the Avocent ACS 6000 stands out as an essential tool for modern IT management, delivering secure, scalable, and user-friendly solutions for remote access to serial controlled devices. With its advanced features and robust design, it effectively meets the challenges of IT infrastructure management in today's fast-paced digital landscape.
Top Page Image Contents