Avocent ACS 6000 manual Type add then press Return, Hosts cli-cd 172.26.31.164/settings

Page 45

Chapter 4: CLI Overview for Administrators 37

127.0.0.1

ip: 127.0.0.1

hostname: localhost

alias:

127.0.0.1/

3.Type add then press Return.

--:- hosts cli-> add<Return> --:#- [hosts] cli-> ls

ip = hostname = alias =

--:#- [hosts] cli->

4.Enter set hostname=<hostname> ip=<IP_address> to add the name of a host and the IP address for the host.

NOTE: Each parameter that follows the add command is separated by a space.

--:#- [hosts] cli->set hostname=sharedacs6000 ip=172.26.31.164

5.Enter commit.

--:#- [hosts] cli-> save

6.Enter show to verify the changes took place and to view the new host entry.

--:- hosts cli-> show 127.0.0.1

ip: 127.0.0.1

hostname: localhost alias: 172.26.31.164

ip: 172.26.31.164

hostname: sharedacs6000 alias:

127.0.0.1/add

172.26.31.164/

7.Enter cd <IP_address>/settings to navigate to the level where you can perform additional configuration of the host entry.

--:- hosts cli->cd 172.26.31.164/settings

8. Enter show to view the additions to the host table and the Settings option.

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Cyclades ACS Safety and EMC Approvals and Markings FCC Warning StatementCanadian DOC Notice Cyclades ACS Symbols Used TA B LE of C on TE N TS Port Access and Configuration Examples Table of Contents Page Introduction, Navigation Commands CLI utility can be accessed in the following ways Access Options and How to Log Into the CLITo start the CLI Configuration Tasks Performed With the CLICli- cdTabTab CLI NavigationIntroduction, Navigation and Commands AutocompletionPrompt like the following appears at each level Parameters Command Line SyntaxSyntax used Page Help Commands Used for the CLIDelete AddPwd ConnectSniff Disconnect ShareExit/quit FtpSet ScpCommit RevertShow ListconfigurationTo power control on, off, cycle outlets of one specific PDU Go to the access levelGo to the PDU level under access Cycle, on, off, lock and unlockPasswd OpiepasswdGo to the outlet level for the specific PDU Wiz Special Multi-session CommandsListsharedsession KillsharedsessionShowdatabuf and showappliancedatabuf Cleandbuf and cleanappliancedatabufCLI Equivalent Actions to Web Manager Checkbox Selection Page Port Access and Configuration Tasks Port Access and Configuration ExamplesAccess Parameters Field Description For Appliance For PowerFor Serial Port Field For Outlets Port Access and Configuration ExamplesAccessing Serial Ports using tsmenu Connect to a Device Console Connected to a Serial PortTo connect to a device console connected to a serial port Port Configuration Examples Manage Power for a Device Connected to an Outlet on a PDUTsmenu options To close the target sessionLog onto the CLI as an administrator To set up a console access service CAS portEnter show to view the status of port To enable a power management portPage Type ls to see available sub-nodes System Enter cd system to navigate to the System levelEnter ls to view the available options System/Security Enter cd security to navigate to the security levelSystem/Security Options System Navigation Tree CLI Overview for Administrators System/Date and TimeDate and Time Options Date and Time Navigation Tree System/Help and Language To set the login bannerSystem/General To set the online help URLEnter show to view the system information System/Boot ConfigurationSystem/Information System/UsageEnter show to view the list of available options Network/SettingsNetwork Enter cd network to navigate to the Network levelNetwork/IPv4 and IPv6 To configure a IPv4 or IPv6 static IP addressNetwork/Devices Network/IPv4 and IPv6 Options IPv4 and IPv6 Navigation TreeNetwork/Hosts Enter show to view the changesTo add a host to the host table Network/Devices Options Devices Navigation TreeType add then press Return Hosts cli-cd 172.26.31.164/settingsNetwork/IPSecVPN Network/FirewallEnter cd network/firewall to navigate to the firewall level Enter cd network/ipsecvpn to navigate to the ipsecvpn levelNetwork/SNMP Wiz commandEnter cd network/snmp to navigate to the snmp level 11 Network/IPSecVPN Options IPSecVPN Navigation TreePorts Enter cd ports to navigate to the Ports level13 Ports Options Ports Navigation Tree CLI Overview for Administrators 14 Serial Port Commands CommandSummary To copy the configuration from serial port 5 to ports 10 Auxiliary portsAppliance with an internal modem Appliance without an internal modem Pluggable Devices16 Authentication Options Authentication Navigation Tree AuthenticationUsers Enter cd users to navigate to the users levelEnter show to verify that the new user has been added To add a user and passwordSyslog Enter saveEventsandLogs 18 Syslog Options Syslog Navigation Tree19 EventsandLogs Options EventsandLogs Navigation Tree Power Management Options are described in the table below Power Management20 Power Management Options Descriptions Option Description To rename a PDUTo manage power for a selected outlet CLI Overview for Administrators Enter set newpduid=newPDUIDActive Sessions Information To view and kill ActiveSessionsPage Enter shell. a warning appears followed by the root prompt Connect to the console of the console server as rootPage Table B.1 Access Rights Groups Members Permissions Access rightsAppendix B Migration CLI AppendicesAdministration Table B.2 Commands Not Supported by the Migration CLIConfig administration bootconf Config administration notificationsConfig network hostSettings Command Value or DescriptionsConfig physicalports access Config physicalports databufferingConfig security profile custom Config physicalports power managementConfig security loadkey Url Username Page Su command Appendix C Su and Sudo CommandsRun the groups command to verify Table C.1 Su Command Options OptionDescriptionConfiguring sudo Sudo commandTo delete a member from the wheel group Page Page Appendix D Technical Support To resolve an issuePage For Technical Support
Related manuals
Manual 70 pages 12.94 Kb

ACS 6000 specifications

The Avocent ACS 6000 is a leading edge solution designed for remote access and management of critical IT infrastructure. This compact and robust device serves as a key tool for IT administrators, allowing them to manage serial console access for servers, networking equipment, and other serially controlled devices. Ideal for both enterprise environments and smaller settings, the ACS 6000 enhances operational efficiency and reliability.

One of the standout features of the Avocent ACS 6000 is its ability to provide secure remote access. The device supports various security protocols, including SSH, SSL, and IP filtering, ensuring that access to the managed devices is protected against unauthorized entry. With strong encryption standards, it provides peace of mind for organizations handling sensitive data.

The ACS 6000 is equipped with advanced management capabilities, enabling administrators to monitor and control serial communications across multiple devices from a single interface. This centralized management not only reduces the complexity associated with handling numerous individual devices, but it also streamlines troubleshooting and system diagnostics, resulting in quicker response times and less downtime.

Another notable characteristic of the ACS 6000 is its scalability. The modular design allows for easy expansion as organizational needs evolve. IT managers can begin with a basic configuration and upgrade seamlessly by adding more ports or features as necessary. This flexibility makes the ACS 6000 an ideal solution for growing organizations.

User-friendly features such as an intuitive web interface simplify the setup and configuration process. Through this interface, users can easily navigate and utilize various functions, including alert settings, logging, and reporting features that provide valuable insights into device performance and usage patterns.

In addition to its robust functionality, the ACS 6000 is designed with reliability in mind. Built to endure varied environmental conditions, it operates reliably in data centers and remote locations alike. The device can also handle high-voltage operations, making it versatile for various industrial applications.

In summary, the Avocent ACS 6000 stands out as an essential tool for modern IT management, delivering secure, scalable, and user-friendly solutions for remote access to serial controlled devices. With its advanced features and robust design, it effectively meets the challenges of IT infrastructure management in today's fast-paced digital landscape.
Top Page Image Contents