Setting up Your
Dialogue VCO (continued)
3.Lift the handset and listen for a dial tone.
The phone is ready to use.
Wall Mount:
1.Pull the handset hook out as shown in Figure 5 and reverse its position so that the hook points up and will hold the handset when you hang up.
MANUAL
AUTO
Figure 6 - Phone Base Installation for Wall Mounting
3.Plug in the short phone line cord and mount the phone as shown in Figure 7.
Figure 5 - Reversing the Hook
2.Insert the tabs of the phone base into the slots in the lower position of the base as shown in Figure 6. Push the phone base in and down firmly until it snaps into place.
Figure 7 - Wall mounting installation
4.See Desktop Use section and follow steps 1 through 3.
5