Axis Communications 243Q user manual Resetting to the factory default settings

AXIS 243Q Blade - Resetting to the factory default settings 49

Resetting to the factory default settings

This will reset all the parameters in all 4 units (including all four IP addresses) to the factory default settings.

1.Disconnect power.

2.Press and hold the Control button and reconnect power.

3. Release the button when the Status Indicator displays red (this may take up to 15 seconds). When the Status Indicator changes to Green (may take up to 1 minute), the process is complete and the AXIS 243Q Blade has been reset.

4.Re-assign the IP addresses, using one of the methods described in this document.

LED Indicators

Control button

To reset an individual unit to the original factory default settings, use the button provided in that unit’s web interface. For more information, please see the online help.