Axis Communications 243Q user manual An IP address consists of four groups or quads

Page 65

of the server.

Hub - A (network) hub is used to connect multiple devices to the network. The hub transmits all data to all devices connected to it, whereas a switch will only transmit the data to the device it is specifically intended for.

IEEE 802.11 - A family of standards for wireless LANs. The 802.11a standard supports 1 or 2 Mbit/s transmission on the 5 GHz band. IEEE 802.11b supports data rates up to11 Mbit/s on the 2.4 GHz band, while 802.11g allows up to 54 Mbit/s on the 2.4 GHz band.

Image compression - Image compression minimizes the file size (in bytes) of an image. Two of the most common compressed image formats are JPEG and GIF. See also MPEG and Motion JPEG.

Interlacing - Interlaced video is video captured at 50 pictures (known as fields) per second, of which every 2 consecutive fields (at half height) are then combined into 1 frame. Interlacing was developed many years ago for the analog TV world and is still used widely today. It provides good results when viewing motion in standard TV pictures, although there is always some degree of distortion in the image.

To view interlaced video on e.g. a computer monitor, the video must first be de-interlaced, to produce progressive video, which consists of complete images, one after the other, at 25 frames per second. See also Progressive scan.

IP (Internet Protocol) - The Internet Protocol is a method transmitting data over a network. Data to be sent is divided into individual and completely independent "packets." Each computer (or host) on the Internet has at least one address that uniquely identifies it from all others, and each data packet contains both the sender's address and the receiver's address.

The Internet Protocol ensures that the data packets all arrive at the intended address. As IP is a connectionless protocol, which means that there is no established connection between the communication end-points, packets can be sent via different routes and do not need to arrive at the destination in the correct order.

Once the data packets have arrived at the correct destination, another protocol - Transmission Control Protocol (TCP) - puts them in the right order.

See also TCP.

IP address - An IP address is simply an address on an IP network used by a computer/device connected to that network. IP addresses allow all the connected computers/devices to find each other and to pass data back and forth.

To avoid conflicts, each IP address on any given network must be unique. An IP address can be assigned as fixed, so that it does not change, or it can be assigned dynamically (and automatically) by DHCP.

An IP address consists of four groups (or quads) of

AXIS 243Q Blade - Glossary 65

decimal digits separated by periods, e.g. 130.5.5.25. Different parts of the address represent different things. Some part will represent the network number or address, and some other part will represent the local machine address. See also IP (Internet Protocol).

Inputs/Outputs (I/Os) - The digital I/Os on, for example, a network camera can be used to connect any device that can toggle between an open and a closed circuit.

For example, if a door switch is used as an input device, opening the door could trigger the upload of video images and the sending of notification messages.

An output might, for example, be used to automatically start a siren when there is a motion detection trigger.

ISMA (Internet Streaming Media Alliance) - ISMAs goal is: "To accelerate the adoption and deployment of open standards for streaming rich media content such as video, audio, and associated data, over Internet protocols."

I-VOP- See VOP.

JPEG (Joint Photographic Experts Group) - Together with the GIF file format, JPEG is an image file type commonly used on the web. A JPEG image is a bitmap, and usually has the file suffix '.jpg' or ".jpeg." When creating a JPEG image, it is possible to configure the level of compression to use. As the lowest compression (i.e. the highest quality) results in the largest file, there is a trade-off between image quality and file size.

kbit/s (kilobits per second) - A measure of the bit rate, i.e. the rate at which bits are passing a given point. See also Bit rate.

LAN (Local Area Network) - A LAN is a group of computers and associated devices that typically share common resources within a limited geographical area.

Linux - Linux is an open source operating system within the UNIX family. Because of its robustness and availability, Linux has won popularity in the open source community and among commercial application developers.

Lux - A standard unit of illumination measurement.

MAC address (Media Access Control address) - A MAC address is a unique identifier associated with a piece of networking equipment, or more specifically, its interface with the network. For example, the network card in a computer has its own MAC address.

Manual iris - This is the opposite of an autoiris, i.e. the camera iris must be adjusted manually to regulate the amount of light allowed to reach the image sensor.

Mbit/s (Megabits per second) - A measure of the bit rate, i.e. the rate at which bits are passing a given point. Commonly used to give the "speed" of a network. A LAN might run at 10 or 100 Mbit/s. See also Bit rate.

Monitor - A monitor is very similar to a television set, but

Image 65
Contents Axis 243Q Blade Video Server User’s Manual About This Document Page Contents Axis 243Q Blade Overview Product descriptionSwitches & connectors LED indicatorsAxis 243Q Blade Product description Access from a browser Accessing the video serverLayout Setting the root passwordLive View Axis 243Q Blade Accessing the video server Motion Jpeg Video streamsVideo stream types MPEG-4 protocols and communication methods How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control AMC Other MPEG-4 clients Accessing the Setup link Configuring the video serverImage appearance Image settingsVideo & Image Test Text overlay settingsVideo stream Advanced MPEG-4 settings Video source settingsBit Rate control Overlay/Mask Settings Advanced Mjpeg settingsOverlay/Mask Upload and use an overlay imageImage Formats Image Size Overlay image requirementsOverlay image limitations Default Video Format Live View ConfigDefault Viewer Viewer SettingsUser-defined Links Action ButtonsCheck Show custom link Output ButtonsPan Tilt Zoom Installing PTZ devicesAuthentication key Preset positions PTZ configurationPTZ controls Control panel Using CGI links to control PTZ devicesPTZ control modes Advanced Guard tourPTZ control queue Using PTZ on video inputs Event types Event configurationEvent servers Triggered Event How to set up a triggered eventClick Add triggered... on the Event Types Enter the minimum time interval between triggersClick Add scheduled... on the Event Types How to set up a scheduled eventScheduled event Camera tampering Motion detection How to configure Motion DetectionClick Motion Detection in the Event Config menu Object Size Port statusSecurity System optionsUsers IP Address FilterIeee HttpsRadius Authentication processAxis 243Q Blade System options CA servers Date & timeIPv4 and IPv6 Address Configuration Basic TCP/IP settingsServices NetworkHost Name Configuration DNS configurationNTP configuration Network traffic Link-Local IPv4 addressNAT traversal port mapping for IPv4 Smtp email QoS Quality of serviceQoS Settings Ports & devices UPnPBonjour Support MaintenanceSupport Overview System OverviewAbout Access Log The Access Log may be used for various purposesResetting to the factory default settings Pin Function Description Terminal connectorRS-485-A Non-invertingAxis 243Q Blade Schematic diagram I/O terminal connector10o 11oRS-485 COM port Upgrading the firmware TroubleshootingChecking the firmware Emergency recovery procedure Alarms, to a destination outside the local network Axis 243Q Blade cannot be accessed from a web browserServer is inaccessible Video Image ProblemsOnly I frames Snapshot imagesNTSC/PAL Technical specificationsMaintenance Weight Optimizing your system General performance considerationsBandwidth Axis 243Q Blade Glossary GlossaryDe-interlacing See Interlacing Compression See Image compressionFixed iris See Autoiris Encoder See Video encoderAn IP address consists of four groups or quads Megapixel See Pixel Axis 243Q Blade Glossary SSL/TSL An I-VOP is a complete image frame Live view config Factory default settings 49 firmwareIndex Generic Http Generic TCP/IPLive View Video source Video streams 12, 14, 18 Viewer settings
Related manuals
Manual 6 pages 31.82 Kb

243Q specifications

Axis Communications is a leading provider of network video solutions, renowned for its innovative products designed for various surveillance applications. Among their range of offerings, the Axis 243Q, 247S, 241S, Q74011, and 241QA stand out for their impressive features, advanced technology, and robust characteristics tailored to enhance security and monitoring.

The Axis 243Q is a high-performance network camera that excels in delivering exceptional video quality. With a resolution of up to 2048x1536 pixels, it supports high-definition video streaming, ensuring that even the smallest details are captured with clarity. This camera is equipped with Axis’ unique Lightfinder technology, which enables superior low-light performance, making it ideal for surveillance in poorly lit environments. Additionally, it features multiple compression formats, including H.264 and Motion JPEG, which help to optimize bandwidth and storage requirements.

The Axis 247S is a compact and versatile network camera that incorporates a seamless design suitable for various interior settings. It boasts a dual stream capability, meaning it can transmit two video streams simultaneously, which can be tailored for different resolutions and frame rates. This feature is particularly beneficial for resource management, allowing users to view lower-resolution streams remotely while saving storage space. Furthermore, the 247S’s built-in audio support allows for two-way communication, enhancing security collaboration.

The Axis 241S network camera is designed for reliable monitoring and high-quality video surveillance in both indoor and outdoor applications. With its weather-resistant housing, it excels in challenging environmental conditions. This camera offers multiple lens options and has infrared illumination capabilities, allowing for night-time surveillance without compromising visibility. The 241S's Power over Ethernet (PoE) support simplifies installation by allowing the camera to receive power and data through a single cable.

For a more advanced solution, the Axis Q74011 Video Encoder facilitates the integration of analog cameras into IP networks seamlessly. It converts analog video signals into digital IP streams, enabling the incorporation of traditional cameras into modern network infrastructures. This versatility allows businesses to upgrade their surveillance systems incrementally without having to replace existing equipment fully.

Lastly, the Axis 241QA camera combines the advantages of image quality with intelligent video analytics. It incorporates advanced algorithms for motion detection, line crossing, and object removal, enhancing monitoring efficiency. The camera’s lens is designed for up to 30 frames per second at full resolution, providing smooth and fluid video for critical surveillance applications.

In summary, the Axis 243Q, 247S, 241S, Q74011, and 241QA collectively represent Axis Communications' dedication to innovation, quality, and user-centric design. With various features such as high-resolution video streaming, adaptability to diverse environments, and advanced analytics, these models cater to a wide range of security needs across various sectors.