
Cable Connections
Power On/Off Button | Diagnostics | |
Connector | ||
|
AC Power | Ethernet 0 | Ethernet 1 |
Connector | Connector | Connector |
Figure 7. Cable Conections
Power Connection
Route the power cable to the power connector located at the the back of the appliance.
The power cable can be plugged into a standard 120 volt to 240 volt wall outlet. The appliance uses an
Do not use an extension cord. The unit must be located next to the AC outlet, and the outlet must be easily accessible. In the event an emergency power cutoff is required, pull the plug from the AC socket.
Network Connection
Connect an ethernet network cable to the Ethernet 0 connector. The second Ethernet 1 connector can be used for load balancing or fail over protection. By default, Ethernet 1 is disabled.
Hardware Installation | Plasmon AA Express User Manual |
Page 18 | Document Revision B |