Network Computing Devices manual NCD ThinSTAR 300 User’s Guide

Advanced Users Configuration Notes

Table A-1 Connection Manager Tasks

Task	Action
Designating	On the Configure tab, select the
default	connection you want as the default.
connections	Display the Connection Startup panel by
	clicking Startup. Click the Make the
	selected connection your default
	connection option and click OK.
Configuring	On the Configure tab, select the
autostart	connection you want to start
connections	automatically. Display the Connection
	Startup panel by clicking Startup.
	Click the Automatically start the selected
	connection at startup option and click
	OK.
	Note An autostart connection also
	functions as the default
	connection. Designating a
	different connection as the
	default makes any autostart
	connection revert to
	non-autostart status.
	When you log off an autostart
	connection, the connection
	restarts automatically, see
	“Stopping autostart connections”
	below.
Stopping	On the Configure tab, select the autostart
autostart	connection you want to end. Display the
connections	Connection Startup panel by clicking
	Startup. Click the “Make the selected
	connection your default connection.”
	option and click OK.

A-4 NCD ThinSTAR 300 User’s Guide