Network Computing Devices 300 If the Connection Manager Displays, If the Setup Wizard Displays

NCD ThinSTAR 300 Basics

If the Connection Manager Displays

Depending on how your terminal is configured, the NCD ThinSTAR Connection Manager may list one or more connections. If the Connection Manager displays:

1.Select a connection by clicking on its Connection Name in the connection list and clicking Connect (or simply double-click the Name). If the connection was defined for automatic logon, and the server it connects to is running, the terminal makes the connection and you are logged on.

2.If the a Logon Information panel displays:

a.Enter your User name and Password.

b.If the Domain or From field displayed in the panel is not correct, select another from the drop-down list.

c.Click OK.

For more detailed information about the Windows NT 4.0 desktop, see Chapter 2.

If the Setup Wizard Displays

The first time a terminal starts, the NCD ThinSTAR Setup Wizard displays. The wizard may also display under other circumstances.

Ask your system administrator whether you need to change any of the data in the wizard screens. The following instructions assume you are going to use the terminal’s default values, which should work well under most conditions.

To page through the Wizard:

1.Click Next in the first Wizard page.

2.Click Accept in the license acceptance page.

3.Click Next in all of the remaining data entry pages.

4.In the last page, click Finish. You now have a default connection configured for your terminal.

NCD ThinSTAR 300 User’s Guide 1-5