After you enter the parameter name, the ndd utility prompts you for the parameter value.
2. To list all the parameters supported by the nxge driver, type ?.
#ndd /dev/nxge1 name to get/set ?
? | (read only) |
function_number | (read only) |
adv_autoneg_cap | (read and write) |
adv_10gfdx_cap | (read and write) |
adv_1000fdx_cap | (read and write) |
adv_100fdx_cap | (read and write) |
adv_10fdx_cap | (read and write) |
adv_pause_cap | (read and write) |
accept_jumbo | (read and write) |
rxdma_intr_time | (read and write) |
rxdma_intr_pkts | (read and write) |
class_opt_ipv4_tcp | (read and write) |
class_opt_ipv4_udp | (read and write) |
class_opt_ipv4_ah | (read and write) |
class_opt_ipv4_sctp | (read and write) |
class_opt_ipv6_tcp | (read and write) |
class_opt_ipv6_udp | (read and write) |
class_opt_ipv6_ah | (read and write) |
class_opt_ipv6_sctp | (read and write) |
Setting Parameters Using the nxge.conf File
Specify the driver parameter properties for each device by creating a nxge.conf file in the /kernel/drv directory. Use a nxge.conf file when you need to set a particular parameter for a device in the system.
The man pages for prtconf(1M) and driver.conf(4) include additional details. The next procedure shows an example of setting parameters in a nxge.conf file.
●To access any man page, type the man command plus the name of the man page.
For example, to access man pages for prtconf(1M), type: