Packard Bell MX manual Bluetooth Optional, Touchpad, 1313131313

1313131313 13

Bluetooth (Optional)

To remove the optional Bluetooth module, first remove the battery (see Battery), the HDD (see Hard Disk Drive), the CD-ROM or DVD drive (see Optical Disk Drive), the wireless network card (see WLAN Card), the installed memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen (see LCD Screen Assembly), the main board up to step 8 (see Main Board), and then perform the following steps:

1. Carefully disconnect the Bluetooth cable.

Fig. 21 Location of Bluetooth module and connector.

2. Extract the Bluetooth module; the module has been clicked into place (see Fig. 21).

Touchpad

To remove the touchpad, first remove the battery (see Battery), the HDD (see Hard Disk Drive), the CD- ROM or DVD drive (see Optical Disk Drive), the wireless network card (see WLAN Card), the installed memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen (see LCD Screen Assembly), the main board top cover up to step 7 (see Main Board), and then perform the following steps:

1. Remove the 2 screws securing the touchpad buttons board to the top cover.

Fig. 22 Location of touchpad buttons board.

Packard Bell EasyNote MX Disassembly Manual