Packard Bell MX manual Battery, Hard Disk Drive, 44444

44444 4

Battery

Perform the following steps to remove the battery:

1.Make sure the power is off.

2.Turn the notebook upside down.

Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to the exterior of the notebook.

3.Push the 2 locks in the direction of the arrows to the release the battery compartment cover and remove the cover.

4.Take the battery out of the compartment.

Fig. 1 Removing battery.

Hard Disk Drive

To remove the HDD, first remove the battery (see Battery) and then perform the following steps:

1.Remove the 2 screws on the hard disk drive cover and remove the cover (see Fig. 1).

2.Pull the plastic tab on the hard disk drive towards you as shown in Fig. 2 to disconnect the drive.

Fig. 2 Removing hard disk drive.

3. Take the drive out of its compartment.

Packard Bell EasyNote MX Disassembly Manual