Output Connection Considerations

The output connectors provided on each channel of the IPS-1 are standard “binding post” speaker connectors with industry standard spacing. These are sometimes called 5-way binding posts because of the many ways in which the speaker wire can connect into the posts. The posts can accept bare wire, spade terminals, and dual or single banana connectors. Spade connections or banana plugs ensure a simple, solid fit in the terminal whereas bare wire may be awkward when the terminal is screwed down to compress the wire into place. Keep in mind that if you use “dual banana” plugs and “stack” them, you will be creating a parallel connection. For more details on series and parallel connections, see pages 17-18.

It is important to observe polarity so that the speaker wire connects to the red and black terminals on the amplifier and the corresponding terminals at the speaker. Also make sure that the positive speaker wires do not touch the negative speaker wires, or any chassis metal. This will cause a short circuit and activate the protection circuitry.

Ensure Adequate Ventilation

The Emotiva IPS-1 has the power amplifier components arragned in such a fashion to allow heat to rise off of the components and out through the top vents of the chassis. Bottom vents allow fresh air in to create a circulation of the heated air. While the surface area of the heatsink on each ampli- fier circuit board is very generous, we advise all installations to leave 2-3 inches above the top of the IPS-1 chassis so that adequate ventilation is supported. Furthermore, it is not advised to place another amplifier below the unit as that heat will have to also pass up through the IPS-1.

Connection Tips for Superior Sound

Before setting up your new system, please consider the following:

•Always make sure the IPS-1 is turned off before making or changing ANY connections.

•Whenever possible, route the power cords away from the signal cables or speaker wires to prevent any hum or interference heard in the speakers.

•Many RCA type patch cords can be a very tight fit and there is usually a preferred method of get- ting them off. Some have to be removed with a twisting action. Be gentle or you may damage the jacks of your IPS-1, the cables themselves, or other components.

•Many audiophile signal cables are intended to be hooked up in one direction. If this is the case the cables will be marked with arrows the direction of signal flow.

•It is usual for the right channel RCA patch cord plugs to be red and the left channel connections to be white, grey, or black (depending on the cable brand). RCA connectors that are gold will be designated with a colored band to designate the channel.

Page 14

IPS-1 specifications

Emotiva, a leading name in high-end audio equipment, has unveiled the IPS-1 Integrated Power Supply, a product designed to enhance the performance of audio systems significantly. The IPS-1 stands out for its blend of cutting-edge technology and user-centric features, making it a prized addition to any audiophile's setup.

One of the main features of the IPS-1 is its high-output power supply, which boasts a dual transformer design. This configuration allows for improved electrical isolation and refined power delivery to connected components, ensuring that audio signals remain clear and undistorted. The IPS-1 is built with high-quality components that have been meticulously selected to provide superior reliability and performance, giving listeners confidence in their investment.

In terms of connectivity, the IPS-1 includes multiple output options, allowing users to power various Emotiva devices or compatible audio equipment. It features robust binding posts for easy attachment of speaker cables and offers a range of voltages to accommodate different devices, ensuring versatility in its applications. The user-friendly interface simplifies setup and operation, making it accessible even for those who may be new to high-end audio equipment.

Beyond its power delivery, the IPS-1 incorporates advanced regulation technology that minimizes noise and ripple in the power supply. This results in a cleaner signal, which is crucial for maintaining the integrity of audio reproduction. Moreover, the IPS-1 is designed to handle high current loads, which is essential for driving high-performance amplifiers and ensuring they operate efficiently under demanding conditions.

The construction of the IPS-1 also reflects Emotiva's commitment to quality. Its sturdy chassis protects the internal components from external interference and provides excellent heat dissipation, contributing to the overall longevity of the device. A sleek, modern design ensures that the IPS-1 not only performs well but also looks great in any audio setup.

In summary, the Emotiva IPS-1 Integrated Power Supply is an exemplary piece of audio engineering that combines advanced technology with practical features. Its high-output capabilities, versatile connectivity, and superior noise regulation make it an essential component for any serious audio enthusiast looking to enhance their listening experience. By choosing the IPS-1, users can enjoy improved sound quality and reliability, making it a worthwhile addition to any high-fidelity sound system.