Troubleshooting Guide

The Emotiva IPS-1 is expertly designed and built to provide years of trouble-free performance. Most problems that occur can usually be solved by checking your setup or making sure that the audio and video components connected to the amplifier are on and fully operational.

The following information will help you deal with common setup problems you may experience during normal use of your unit. If problems persist, contact your Emotiva Dealer for help.

No Sound (from one or more speakers connected to the IPS-1)

•Speaker cables may have come undone. Turn off your system and check the cables, and tighten the amplifier and speaker binding posts.

•The system may have one or more damaged audio cables.

•The preamplifier volume level is low for the channels concerned. Recheck the preamplifier calibration procedure.

•A preamplifier Mute switch may be on, or an external processor loop or a tape monitor loop is en- gaged.

•Check that your preamplifier or source is running the correct surround sound mode. Maybe it is set for 2-channel stereo when you were expecting 5.1 surround sound.

•Check in case any missing channels have been turned off in a preamplifier setup menu. For example, the center amplifier channel will not receive a signal if the preamplifier has been set to “Phantom.”

•The Auto/on/off switch on the IPS-1 might be in the OFF position.

•Check to see that the ON/OFF rocker switch at the back of the unit is in the ON position.

•The fuse on the unit may have blown .

The amplifier shuts down often or the line fuse blows often

•Check that the positive and negative speaker wires are not shorted together.

•Make sure that no speakers are shorted internally. If you have an ohm-meter, disconnect the speaker wires and measure the resistance between the speaker’s positive and negative terminals. If the reading is less than 2 ohms, the speakers may have an internal short or simply be too low a nominal impedance. Measure all speakers and check their impedance specifications for compliance with the IPS-1 operational characteristics.

•If you have connected speakers in parallel, the overall impedance may be too low. It is recommended that you rearrange the speakers in series to increase the overall impedance, thus taking some of the load off the amplifier.

•Make sure that the amplifier has good ventilation and is not overheating. Allow good airflow under- neath wherever possible. If the amplifier is in a closed rack, open up the rear panel or use a quiet fan for improved ventilation.

Page 25

IPS-1 specifications

Emotiva, a leading name in high-end audio equipment, has unveiled the IPS-1 Integrated Power Supply, a product designed to enhance the performance of audio systems significantly. The IPS-1 stands out for its blend of cutting-edge technology and user-centric features, making it a prized addition to any audiophile's setup.

One of the main features of the IPS-1 is its high-output power supply, which boasts a dual transformer design. This configuration allows for improved electrical isolation and refined power delivery to connected components, ensuring that audio signals remain clear and undistorted. The IPS-1 is built with high-quality components that have been meticulously selected to provide superior reliability and performance, giving listeners confidence in their investment.

In terms of connectivity, the IPS-1 includes multiple output options, allowing users to power various Emotiva devices or compatible audio equipment. It features robust binding posts for easy attachment of speaker cables and offers a range of voltages to accommodate different devices, ensuring versatility in its applications. The user-friendly interface simplifies setup and operation, making it accessible even for those who may be new to high-end audio equipment.

Beyond its power delivery, the IPS-1 incorporates advanced regulation technology that minimizes noise and ripple in the power supply. This results in a cleaner signal, which is crucial for maintaining the integrity of audio reproduction. Moreover, the IPS-1 is designed to handle high current loads, which is essential for driving high-performance amplifiers and ensuring they operate efficiently under demanding conditions.

The construction of the IPS-1 also reflects Emotiva's commitment to quality. Its sturdy chassis protects the internal components from external interference and provides excellent heat dissipation, contributing to the overall longevity of the device. A sleek, modern design ensures that the IPS-1 not only performs well but also looks great in any audio setup.

In summary, the Emotiva IPS-1 Integrated Power Supply is an exemplary piece of audio engineering that combines advanced technology with practical features. Its high-output capabilities, versatile connectivity, and superior noise regulation make it an essential component for any serious audio enthusiast looking to enhance their listening experience. By choosing the IPS-1, users can enjoy improved sound quality and reliability, making it a worthwhile addition to any high-fidelity sound system.