Emotiva IPS-1 manual Turn-on and turn-off thumps, Hum Noises in the Speakers

Page 26

Poor Bass Performance From Full Range Speakers connected to the IPS-1

•Make sure that your preamp does not have the bass (tone control) level turned down.

•Many surround preamplifiers have controls which can direct all the bass to subwoofers or let your main speakers play the full range. Make sure that the preamplifier has been correctly set. If you are not using a subwoofer, set the speaker options to “Large” where possible.

•Check that the speaker wires have been connected correctly: Make sure that the positive of each speaker connects to a positive output of the amplifier, and the negative of each speaker connects to a negative output. If one speaker is wired incorrectly, than it will be “out of phase” with the others, resulting in poor bass performance. In this condition, the speakers' energy is fighting the other rather than combining.

Turn-on and turn-off thumps

•Plug the amplifier into an unswitched AC outlet, and use the SIGNAL position of the turn on switch at the back of the amplifier. This will allow the amplifier to turn on and off silently.

“Hum” Noises in the Speakers

This problem is more than likely caused by a “ground loop” in your system, rather than a fault in the IPS-1. Follow these steps to isolate the main cause of the hum, there may even be more than one. Remember to turn off all components in your system, including the IPS-1, before disconnecting or connecting any cables.

•Remember to turn off all components in your system, including the amplifier, before disconnecting or connecting any cables during troubleshooting.

•Try to have all of your equipment on the same electrical outlet or circuit. Group all the low power com- ponents (preamp, CD player, DVD etc.) on a single outlet or power strip. This is provided that the overall current draw from your equipment does not exceed the rating of the outlet or breaker.

•Disconnect all cables which come from outside the room, and check if the hum goes away. This includes such connections as cable TV, satellite TV, or roof top antennas. Make sure that they are disconnected where they first enter the room, so they are making no connection to the preamplifier or the TV, or any other component. If the hum is caused by the cable TV line, then you will need a “ground loop isolator.” This is an inexpensive device fitted in line with the coaxial cable feed. Contact your cable company or your Emotiva Dealer for assistance.

•Disconnect all connections from the preamplifier to your TV, VCR or DVD.

•As a test, disconnect any other component which has a grounded power cord.

NOTE: Never remove the ground pin from any power cords (if present). This is very dangerous.

•If the hum persists, disconnect all the source components one at a time from the back of the preampli- fier, until you identify the problem.

•Try moving the speaker cables away from any power cords. Try just one speaker, connecting it to each amplifier channel and see if one channel is bad.

Page 26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents USER’S Guide Table of Contents Service Assistance for the IPS-1 Emotiva Disclosure Zone 2 AmplificationSafety Precautions Page NEC National Electrical Code Standards Thank You for your IPS-1 Purchase Dear Home Entertainment EnthusiastUnpacking the IPS-1 Recording the Serial NumberEmotiva IPS-1 Integrated Power Amplifier Integrated-Modular Power Amplifier FeaturesIPS-1 Front Panel Features Power Button Amplifier Channel DisplayIPS-1 Rear Panel Layout RCA Inputs Channel ID AreaExternal Trigger ConnectionInput Connection Considerations Installation and ConnectionsAC Power Considerations Connection Tips for Superior Sound Output Connection ConsiderationsEnsure Adequate Ventilation Connection Diagrams Input ConnectionsCreating a parallel connection Series and Parallel Speaker Connections SeriesAn example of a Parallel Connection between two speakers Flexible IPS-1 Applications Speaker Placement Tips Tips Before You BeginFront Speakers Place each surround speaker to be an equal Surround Back Speakers Play a test Tone or low bass music Troubleshooting Guide No Sound from one or more speakers connected to the IPS-1Turn-on and turn-off thumps Other Probable Causes of Noise Technical Specifications Emotiva Limited WarrantyService Assistance for the IPS-1 Emotiva Disclosure Page Franklin, TN

IPS-1 specifications

Emotiva, a leading name in high-end audio equipment, has unveiled the IPS-1 Integrated Power Supply, a product designed to enhance the performance of audio systems significantly. The IPS-1 stands out for its blend of cutting-edge technology and user-centric features, making it a prized addition to any audiophile's setup.

One of the main features of the IPS-1 is its high-output power supply, which boasts a dual transformer design. This configuration allows for improved electrical isolation and refined power delivery to connected components, ensuring that audio signals remain clear and undistorted. The IPS-1 is built with high-quality components that have been meticulously selected to provide superior reliability and performance, giving listeners confidence in their investment.

In terms of connectivity, the IPS-1 includes multiple output options, allowing users to power various Emotiva devices or compatible audio equipment. It features robust binding posts for easy attachment of speaker cables and offers a range of voltages to accommodate different devices, ensuring versatility in its applications. The user-friendly interface simplifies setup and operation, making it accessible even for those who may be new to high-end audio equipment.

Beyond its power delivery, the IPS-1 incorporates advanced regulation technology that minimizes noise and ripple in the power supply. This results in a cleaner signal, which is crucial for maintaining the integrity of audio reproduction. Moreover, the IPS-1 is designed to handle high current loads, which is essential for driving high-performance amplifiers and ensuring they operate efficiently under demanding conditions.

The construction of the IPS-1 also reflects Emotiva's commitment to quality. Its sturdy chassis protects the internal components from external interference and provides excellent heat dissipation, contributing to the overall longevity of the device. A sleek, modern design ensures that the IPS-1 not only performs well but also looks great in any audio setup.

In summary, the Emotiva IPS-1 Integrated Power Supply is an exemplary piece of audio engineering that combines advanced technology with practical features. Its high-output capabilities, versatile connectivity, and superior noise regulation make it an essential component for any serious audio enthusiast looking to enhance their listening experience. By choosing the IPS-1, users can enjoy improved sound quality and reliability, making it a worthwhile addition to any high-fidelity sound system.
Top Page Image Contents