Silex technology user manual Connecting the Antenna Cables to the SX-SDWAG

Figure 2 Connecting the Antenna Cable(s) to the SX-SDWAG

4.If your device is subject to significant vibration or other forces, Silex recommends the use of a retaining bracket to prevent the accidental ejection of the card. This bracket can be the Silex 150- 00192-100 retaining bracket (see figure 3) or an equivalent custom-made bracket.

Figure 3 Securing the SX-SDWAG with Optional Bracket

5. Connect the other end of the cable(s) to the antenna(s).

Page 10

Silex

Revision A-2

Installation