Connecting the outlet hose
■The outlet hose should disharge into a standpipe, making sure that there are no kinks (fig. 4).
■The standpipe must be at least 40 cm above floor level and it must have an internal diameter of at least 4 cm.
■It is advisable to fit an
■If necessary the outlet hose can be extended up to 2,5 m, provided that it is kept at a maximum height of 85 cm above floor level. The extension pipe is available from the After Sales Service Centre.
4
■The hose can be hooked over the side of the sink, but it must not be immersed in water, in order to prevent water from being syphoned back to the machine when this is in operation (fig. 4Y).
■When installing the appliance under a worktop the hose pipe clamp must be attached to the wall in the highest possible position under the worktop (fig. 4Z).
■Check that there are no kinks in the inlet and outlet hoses.
6
