Samsung UA58J5200ARXUM, UA40J5200DRXUM manual Connecting to a Wireless Internet Network Manually

Connecting to a Wireless Internet Network Manually

Network > Network Settings

With networks that require a static IP address, you will need to enter the IP address, subnet mask, gateway and DNS values manually to connect to the network. To get the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).

""

1.

Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP addresses.

Setting the Network type to Wireless automatically displays a list of available wireless networks.

Network Settings

Select your network type.

Network typeWireless

Wireless network

AP0000	You can connect your TV to
AP0001	the internet. Please select
Add Network	which wireless network to
	use.
Refresh	WPS(PBC)

2.

3.

4.

Select the network (SSID) you want to connect to. If the wireless router doesn't appear in the list, select Add Network, and enter the network's SSID manually.

Enter the security key and select OK. If the selected network is not security-enabled, the TV attempts to connect right away.

Select Stop when the TV attempts to connect to the network. Once the network connection has been interrupted, select IP Settings.

Network Settings

Connection verification cancelled.

Wireless network connection test stopped.
Change Network	IP Settings	Retry	Close