Anynet+ (HDMI-CEC) isn't working.
The Problem
Try this!
| Confirm that the device is an Anynet+ device. The Anynet+ system supports | |
| Anynet+ devices only. | |
| Check if the power cord of the Anynet+ device is properly connected. | |
| Check the cable connections of the Anynet+ device. | |
Anynet+ does not | Go to System and see if Anynet+ | |
Check whether the TV remote control is in TV mode. | ||
work. | ||
Check whether the remote control is Anynet+ compatible. | ||
| ||
| Anynet+ may not function when certain functions are operational. (Channel Search, | |
| Smart Hub, set up, etc.) | |
| If you have disconnected and then reconnected the HDMI cable, scan for devices | |
| again or turn your TV off and on. | |
|
| |
| Check if the Anynet+ device is properly connected to the TV and then navigate to | |
I want to start | the System menu to see if Anynet+ | |
Anynet+. | Once verified, select TOOLS button. A list appears. Select Anynet+ | |
| from the list and then a device. | |
|
| |
I want to exit Anynet+. | Select View TV from the Anynet+ menu. | |
Select a | ||
| ||
|
| |
The message |
| |
"Connecting to | You cannot use the remote control when you are configuring Anynet+ or switching | |
Anynet+ device..." | ||
to a viewing mode. Use the remote control after the TV has completed the Anynet+ | ||
or "Disconnecting | ||
configuration or has switched to a viewing mode. | ||
from Anynet+ device" | ||
| ||
appears on the screen. |
| |
|
| |
The Anynet+ device | You cannot use the play function when Setup is in progress. | |
won't play. | ||
| ||
|
| |
| Check whether the device supports Anynet+. | |
| Check whether the HDMI cable is properly connected. | |
| Go to System and see if Anynet+ | |
The connected device | Scan for Anynet+ devices again. | |
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the | ||
is not displayed. | ||
device is connected to your TV with an HDMI cable. Some HDMI cables may not | ||
| ||
| support Anynet+. | |
| If the connection is terminated because there has been a power failure or the HDMI | |
| cable has been disconnected, please scan for the device again. | |
|
| |
The TV audio is not | Connect an optical cable to the TV and the receiver. | |
ARC enables digital sound to be outputted via the HDMI (ARC) port. | ||
being played through | ||
However, ARC is only available when the TV is connected to an audio receiver that | ||
the receiver. | ||
supports ARC. | ||
| ||
|
|
