Shuttle Computer Group SA76 manual Enabled

Page 14

English

Enabled

Activates automatically when the system boots up,causing

 

a warning message to appear when anything attempts to

 

access the boot sector or hard disk partition table.

Disabled

No warning message will appear when anything attempts

 

to access the boot sector or hard disk partition table.

The choice: Enabled or Disabled.

Quick Power On Self Test

This item speeds up Power-On Self Test (POST) after you power on the computer. If it is set to enabled, BIOS will shorten or skip some check items during POST.

The choice: Enabled or Disabled.

First/Second/Third Boot Device

The BIOS attempts to load the operating system from the devices in the sequence selected in these items.

The Choice: LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-CDROM or Disabled.

Boot Up Floppy Seek

Enabled tests floppy drives to determine whether they have 40 or 80 tracks.

The choice: Enabled or Disabled.

Security Option

Select whether the password is required every time the system boots or only when you enter setup.

System The system will not boot and access to Setup will be denied if the correct password is not entered promptly.

Setup The system will boot, but access to Setup will be denied if the correct password is not entered promptly.

The choice: System or Setup.

To disabled security, select PASSWORD SETTING at Main Menu, and then you will be asked to enter password.

Don't type anything and just press <Enter>; it will disable

security. Once the security is disabled, the system will boot, and you can enter Setup freely.

10

Image 14
Contents XPC User Guide Shuttle XPC Installation Guide Copyright Safety Information Table of Contents Driver and Software Installation  Motherboard Driver DVD Installing Motherboard Software Bios Settings Enter the BiosSetup Items Main MenuPnP / PCI Configurations  Standard Cmos Features IDE Adapters Set the Landing zone size  Advanced Bios Features Enabled English  Integrated Peripherals English English  Power Management Setup English  PnP/PCI Configurations  PC Health Status +5VSB Frequency/Voltage Control English  Load Default Settings  Set Supervisor/User Password Save & Exit Setup  Exit Without Saving