English

CIR Function

This item allows you to set the CIR Function.

The choice: Enabled, or Disabled.

USB Device Setting

Option are in its sub-menu.

Press<Enter>to enter the sub-menu of detailed options.

USB 2.0 Controller

Enable or Disable Universal Host Controller Interfacefor Universal Serial Bus.

The choice: Enabled or Disabled.

USB Operation Mode

Auto decide USB device operation mode.

High speed: If USB device was high speed device, then it operated on high speed mode.If USB device was full/low speed device, then it operated on full/low speed mode.

Full/Low Speed: All of USB device operated on full/low speed mode.

The choice: High speed or Full/Low Speed.

USB Storage Function

Enable or Disable Legacy support of USB USB Mass Storage.

The choice: Enabled or Disabled.

*** USB Mass Storage Device Boot Setting ***

UFDDA USB Floppy

UFDDB USB Floppy

No Device

Auto: According to contents of USB MSD decide boot up type.

FDD Mode: The USB MSD always boot up as floppy disk.

HDD Mode: The USB MSD always boot up as hard disk.

The choice: Auto mode, FDD mode or HDD mode.