FieldServer FS-8700-133 instruction manual Genisys Description, Driver Scope of Supply

Page 3

FS-8700-133 Genisys Manual

Page 3 of 13

 

 

1GENISYS DESCRIPTION

The Genisys driver allows the transfer of data to and from devices over RS-232 Genisys protocol. Vital Harmon Logic Controller (VHLC) supports Genisys protocol. IM-188 VHLC GENISYS SOFTWARE MANUAL 100188-008 AB0.PDF is the basis of the Genisys driver. The FieldServer can be configured as a Client. Limited Server side functionality has been implemented for FieldServer’s quality assurance requirements only.

Max Nodes Supported

FieldServer Mode

Nodes

Comments

Client

1

Only 1 virtual client per port allowed on multidrop systems.

 

 

 

Server

255

Maximum device addresses pollable by Client – protocol limitation.

 

 

 

2DRIVER SCOPE OF SUPPLY

2.1Supplied by FieldServer Technologies for this driver

FieldServer Technologies PART #

Description

FS-8915-10

UTP cable (7 foot) for RS-232 use

 

 

FS-8917-04

RJ45 to DB25F connector adapter

 

 

FS-8700-133

Driver Manual.

 

 

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Driver Manual FS-8700-133 Genisys Table of Contents Genisys Description Driver Scope of SupplySupplied by FieldServer Technologies for this driver Hardware Connections Data Arrays/Descriptors Configuring the Fieldserver AS a Genisys ClientClient Side Connection Descriptions OFF, on Client Side Node DescriptorsTiming Parameters Driver Related Map Descriptor ParametersMap Descriptor Example Read Indications Map Descriptor Example Write Controls Configuring the Fieldserver AS a Genisys Server Appendix A.1. Storage Structure for Data Type Bit and Byte Appendix A. Advanced TopicsAppendix B. Error Messages
Top Page Image Contents