| Page 1 of 7 |
1.Modbus Daniels Description
The Modbus Daniels driver allows the FieldServer to transfer data to and from devices over either
Modbus Daniels is an inclusion into Modbus ASCII, allowing floats to be used. Modbus Daniels is designed to support floats in the address range 7000 to 7999. The "Double" data type is not supported. Other standard Modbus data types are supported.
Max Nodes Supported
| FieldServer Mode |
| Nodes |
|
| Comments |
|
|
|
|
|
| The maximum achievable number of devices on the |
| Client |
| 255 |
|
| network may be less depending on device loading and |
|
|
|
| network speed characteristics. Only one client device | ||
|
|
|
|
|
| |
|
|
|
|
|
| allowed on multidrop systems. |
|
|
|
|
|
|
|
2.Driver Scope of Supply
2.1.Supplied by FieldServer Technologies for this driver
| FieldServer Technologies |
|
| Description |
|
| PART # |
|
|
| |
|
|
|
|
| |
|
|
| UTP cable (7 foot) for RS_232 use |
| |
|
|
| RJ45 to DB25M connection adapter |
| |
| SPA59132 |
|
|
| |
| - |
|
| Driver Manual. |
|
|
|
|
|
|
|
2.2.Provided by the Supplier of 3rd Party Equipment
2.2.1.Required 3rd Party Configuration
The Modbus Daniels device must be set to use Modbus ASCII protocol.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)