Maxtor Computer Drive manual Write Mulitple EXT

	ATA Bus Interface and ATA Commands
Table 5-1Supported Commands
	Command	Feature
Command		Register
	Code
		Value(s)
WRITE MULITPLE EXT	39h
WRITE VERIFY	3Ch
WRITE DMA FUA EXT	3Dh
WRITE DMA QUEUED FUA EXT	3Eh

Note: 1. As defined in the ATA/ATAPI-6 standard.

Identify Drive Command

This command allows the host to receive parameter information from the drive. When the command is received, the drive:

1.Sets BSY

2.Stores the required parameter information in the sector buffer

3.Sets the DRQ bit

4.Generates an interrupt

The host may then read the information out of the sector buffer. Parameter words in the buffer are shown in Table 5-2.

Note: All reserved bits or words should be zeroes.

Maxtor DiamondMax 8S 40GB SATA 5-5