Scaling | FieldServer FS-8704-13 guide

FS-8704-13 GE-SRTP

Driver Manual

*SRTP:#6 FYI. Connect remaining bytes non-zero

This message requires no user action. It is intended for Fieldserver support engineers.

*SRTP:#7 Err. Destination request not supported. *SRTP:#8 Err. Destination response not supported.

The driver has received a message that it cannot respond to. The message received is not normally associated with reading / writing table memory and can be ignored by this driver. There is no corrective action that you can take. If you wish, take a log file using RUIdebug and contact Fieldserver support.

SRTP:#9 Err. Driver des not support unconfirmed messages.

The driver has been polled using a method which does not require confirmation. The driver does not support this method. A panic is produced by this message. There is no corrective action that you can take. If you wish, take a log file using RUIdebug and contact Fieldserver support.

SRTP:#10 Err. Session Mbox bad type. Act/Exp=%x/c0 SRTP:#11 Err. Session Mbox bad SR code. Act/Exp=%x/4f SRTP:#12 Err. Session SR bad param. Act/Exp=%x/01

If this error occurs repeatedly or frequently then take a log using RUIdebug and contact support. If infrequent then it indicate an occasional corrupt message. There is no corrective action you can take to eliminate this error.

SRTP:#13 Err. Cant Process ServiceRQst=%x(h)

The driver cannot process this service request. It can only read/write table memory. There is no corrective action you can take when this message is printed. If you wish, take a log file using RUIdebug and contact Fieldserver support. The message is followed by a buffer dump. Recording the buffer may be useful to Fieldserver support engineers.

SRTP:#14 Err. Cant Process Mbox=%x(h)

The driver cannot process this type of Mailbox message or a valild mailbox message was received in an invalid context. If this message occurs frequently, take a log file using RUIdebug and contact Fieldserver support. The message is followed by a buffer dump. Recording the buffer may be useful to Fieldserver support engineers.

SRTP:#15 Err. Cant Process PDU=%x(h)

The driver can only process ‘connect’ and ‘data request’ PDU’s. . There is no corrective action you can take when this message is printed. If you wish, take a log file using RUIdebug and contact Fieldserver support. The message is followed by a buffer dump. Recording the buffer may be useful to Fieldserver support engineers.

6.3 Scaling

The driver only supports scaling fro the following data types

Analog Inputs (%AI)

Analog Outputs (%AQ)

Registers (%R)

The scaling is only applied when the driver acts as a client.

When using scaling on an active map descriptor which writes data to a PLC ensure that the scaling produces a number in the range 0-65536 ( an unsigned short integer).

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com Page 17

FS-8704-13 specifications

The FieldServer FS-8704-13 is an advanced protocol gateway specifically designed for integrating diverse building automation systems and data communication protocols. This powerful device serves as a bridge between multiple communication protocols, making it an invaluable tool for facility managers and system integrators aiming to create seamless integration of disparate systems.

One of the main features of the FS-8704-13 is its extensive protocol support. The device can communicate with protocols such as Modbus, BACnet, LonWorks, and many others, allowing for versatile compatibility with a wide variety of automation equipment and devices. This wide-ranging support makes it suitable for energy management systems, HVAC systems, lighting controls, and security systems.

The FS-8704-13 utilizes a high-performance processor that ensures quick data processing and reliable communication even under heavy traffic conditions. The device is equipped with multiple communication ports, including Ethernet and RS-232/RS-485 interfaces, enabling it to connect to various types of network environments effortlessly. The dual Ethernet ports facilitate network redundancy, ensuring that communication remains uninterrupted.

Another notable characteristic of the FS-8704-13 is its user-friendly interface, which includes an intuitive web-based dashboard for easy configuration and monitoring. This simplifies the setup process and allows users to visualize system statuses in real-time. Advanced configuration options enable users to customize data mapping and communication parameters to meet specific project requirements.

The FS-8704-13 is built with robustness in mind; it adheres to industry standards for durability and reliability. This makes it suitable for installation in demanding environments such as commercial buildings, industrial facilities, and critical infrastructure. Additionally, the device is equipped with security features, including user authentication and encrypted communication, to protect sensitive data from unauthorized access.

In terms of scalability, the FS-8704-13 is designed to grow with the needs of a facility. Its modular architecture allows for expansion and integration of new protocols and devices as they become available, ensuring that the system remains current and effective at managing building operations.

Overall, the FieldServer FS-8704-13 stands out as a highly versatile and efficient solution for integration challenges faced in today's complex building automation landscape. With its rich feature set, robust technology, and ease of use, it positions itself as a vital asset for improving operational efficiency and reducing operational costs in any facility.